multiwii quadcopter

di muellerr_ch

File stampabili (13)

  • stl

    motor_mount.stl

    1.1 Mo · 1 194 download

    Scarica
  • stl

    leg.stl

    3 Mo · 1 202 download

    Scarica
  • stl

    multiwii_holder.stl

    1.3 Mo · 1 196 download

    Scarica
  • stl

    distance_piece.stl

    314 Ko · 1 179 download

    Scarica
  • stl

    rx_holder.stl

    768 Ko · 1 208 download

    Scarica
  • stl

    cover_base.stl

    2.3 Mo · 1 201 download

    Scarica
  • stl

    lipo_distance_piece.stl

    251 Ko · 1 208 download

    Scarica
  • stl

    lipo_holder.stl

    1.5 Mo · 1 174 download

    Scarica
  • stl

    camera_holder.stl

    1.1 Mo · 1 191 download

    Scarica
  • stl

    drilling_gage1.stl

    108 Ko · 1 199 download

    Scarica
  • stl

    drilling_gage2.stl

    102 Ko · 1 188 download

    Scarica
  • stl

    alu_bar.stl

    154 Ko · 1 181 download

    Scarica
  • stl

    alu_plate.stl

    500 Ko · 1 169 download

    Scarica

Descrizione

this is my implementation of a multiwii quadcopter. i decided to use a partial aluminum frame with 3d printed mounts for the motors and all the electronics. the reason being the much higher stiffness and therefore a relatively high first eigenfrequency of the whole system. this should help, to a certain extent, in reducing the rolling shutter effect when using a cmos camera.
a video of the quadcopter in flight can be found here:
http://youtu.be/2AZZEHWD84U

Tag

#multwii #Quadcopter #quadrocopter