DIY switchable magnet
di greenail
File stampabili (0)
Nessun file STL / OBJ / STEP disponibile per questo pezzo.
Descrizione
https://www.youtube.com/watch?v=YUt_nx_uZZ0
Switchable Magnet.
Center: 17.5mm turned down from .75" all thread
Outer bars: 3/8 (9.5mm)
Magnets: N42 10x5
This is a tad different than the design created by Andrew Klein. It is smaller, the outer "bars" go all the way through, and only the top magnets rotate.
Printed on cetus3d in PLA with 20% infil and .2mm layers