Raspberry Pi Alienware Case
di cudbur
File stampabili (7)
-
stlRPI_Alienware_Shell.stl
1.5 Mo · 1 074 download
-
stl
RPI_Alienware_Grill_Left.stl
1.7 Mo · 1 087 download
-
stl
RPI_Alienware_Shell_-_FDM_Optimized.stl
1.6 Mo · 1 074 download
-
stl
RPI_Alienware_Shell_FDM_Optimized_Rev_2.stl
1.6 Mo · 707 download
-
stl
RPi_Alienware_Tray_rev2.stl
490 Ko · 710 download
-
stl
RPI_Alienware_Shell_rev2.stl
1.5 Mo · 708 download
-
stl
RPI_Alienware_Case_rev2.stl
151 Ko · 717 download
Descrizione
UPDATE:
12/9/2019 Rev 2 - Lowered RPi and added cutout in shell for USB power cables
Raspberry Pi enclosure inspired by Alienware Predator PC case from 2003. Tested with RPI 3 and 4. I'm using a 90degree USB adapter for power
To print shell without supports use the FDM optimized file and allow single perimeter walls settings for the base.
Used one M2.5 brass inserts + M2.5 flat head screw to fasten shell to case
https://www.mcmaster.com/94180a321
Thread-forming screws for plastic used to fasten RPi to tray:
https://www.mcmaster.com/96817a212
Grill is printed with a lot of supports (i.e. 2.5 hour print, mostly support)