Shark Attack
di BoothyBoothy
File stampabili (57)
-
stl1_Standard_Frame_Panel_RH_V1.stl
997 Ko · 1 668 download
-
stl
2_Standard_Frame_Panel_LH_V1.stl
820 Ko · 1 644 download
-
stl
3_Standard_Frame_Foot__2_Required_V1.stl
480 Ko · 1 642 download
-
stl
4_Penguin_Assembly_Jig_V1.stl
88 Ko · 1 655 download
-
stl
5_Penguin_Beak_Lower_V1.stl
1.4 Mo · 1 647 download
-
stl
6_Penguin_Head_Armature_V1.stl
121 Ko · 1 659 download
-
stl
7_Penguin_Upper_Beak_V1.stl
1.2 Mo · 1 643 download
-
stl
8_Shark_Lower_Jaw_V1.stl
797 Ko · 1 643 download
-
stl
9_Cam_1_V1.stl
104 Ko · 1 643 download
-
stl
10_Penguin_Head_Wing_Armature_V1.stl
205 Ko · 1 641 download
-
stl
11_Cam_Axle_V1.stl
871 Ko · 1 639 download
-
stl
12_Penguin_Main_Body_V1.stl
7.5 Mo · 1 665 download
-
stl
13_Penguin_Breast_V1.stl
3 Mo · 1 640 download
-
stl
14_Shark_Dorsal_Fin_V1.stl
2.1 Mo · 1 636 download
-
stl
15_Shark_Body_LH_V1.stl
2.3 Mo · 1 639 download
-
stl
16_Shark_Body_RH_V1.stl
2.5 Mo · 1 638 download
-
stl
17_Shark_Upper_Teeth_V1.stl
445 Ko · 1 629 download
-
stl
18_Shark_Lower_Teeth_V1.stl
66 Ko · 1 635 download
-
stl
19_Penguin_Head_RH_V1.stl
4.2 Mo · 1 635 download
-
stl
20_Penguin_Head_LH_V1.stl
5.2 Mo · 1 630 download
-
stl
21_Penguin_Face_V1.stl
2 Mo · 1 631 download
-
stl
22_Shark_Lower_jaw_Armature_V1.stl
156 Ko · 1 633 download
-
stl
23_Cam_3_V1.stl
164 Ko · 1 633 download
-
stl
24_Large_Gear_V1.stl
725 Ko · 1 642 download
-
stl
25_Cam_End_Spacer_V1.stl
647 Ko · 1 638 download
-
stl
26_Shark_Eye_LH_V1.stl
392 Ko · 1 631 download
-
stl
27_Shark_Eye_RH_V1.stl
392 Ko · 1 629 download
-
stl
28_Penguin_Wing_LH_V1.stl
2.2 Mo · 1 631 download
-
stl
29_Penguin_Wing_RH_V1.stl
2.2 Mo · 1 636 download
-
stl
30_Penguin_Wing_Arm__2_Required_V1.stl
91 Ko · 1 632 download
-
stl
31_Beach_Node_Penguin_Cam_Armature_V1.stl
224 Ko · 1 650 download
-
stl
32_Standard_Handle_Shaft_V1.stl
366 Ko · 1 640 download
-
stl
33_Standard_Handle_Gear_V1.stl
1.5 Mo · 1 638 download
-
stl
34_Standard_Handle_V1.stl
178 Ko · 1 637 download
-
stl
35_Small_Gear_V1.stl
1.5 Mo · 1 640 download
-
stl
36_Cam_2_V1.stl
219 Ko · 1 629 download
-
stl
37_Beach_Node_V1.stl
3.9 Mo · 1 635 download
-
stl
38_Beach_Node_Small_Clip_V1.stl
54 Ko · 1 630 download
-
stl
39_Beach_Node_Large_Clip_V1.stl
52 Ko · 1 629 download
-
stl
40_Ocean_Panel_RH_V1.stl
4.5 Mo · 1 630 download
-
stl
41_Ocean__Panel_LH_V1.stl
6.8 Mo · 1 624 download
-
stl
42_Shark_Jaw_Axle_V1.stl
97 Ko · 1 624 download
-
stl
43_Ocean_Node_End_V1.stl
2.7 Mo · 1 631 download
-
stl
Concentric_Frame_Panel_RH_V1.stl
2 Mo · 1 613 download
-
stl
Concentric_Frame_Panel_LH_V1.stl
1.9 Mo · 1 611 download
-
stl
Deep_Blue_Sea_Frame_Panel_LH_V1.stl
3.3 Mo · 1 625 download
-
stl
Deep_Blue_Sea_Foot_2_Required_V1.stl
2.9 Mo · 1 624 download
-
stl
Deep_Blue_Sea_Frame_Panel_RH_V1.stl
3.1 Mo · 1 626 download
-
stl
Nautilus_Punk_Handle_Shaft_V1.stl
303 Ko · 1 610 download
-
stl
Nautilus_Handle_Gear_V1.stl
822 Ko · 1 617 download
-
stl
Nautilus_Punk_Handle_V1.stl
721 Ko · 1 622 download
-
stl
Nautilus_Punk_Frame_Panel_LH_V1.stl
3.6 Mo · 1 616 download
-
stl
Nautilus_Punk_Foot_2_Required_V1.stl
1.4 Mo · 1 617 download
-
stl
Nautilus_Punk_Frame_Panel_RH_V1.stl
3.7 Mo · 1 612 download
-
stlBallast_Lid_5.stl
462 Ko · 909 download
-
stlOcean__Left_Panel_Ballast_3.stl
6.6 Mo · 901 download
-
stlOcean_Right_Panel_Ballast_3.stl
4.3 Mo · 592 download
Descrizione
Update:28\05\21 Uploaded RH & LH Ocean Panels with a Ballast Pocket and Lid. This is to help act as a counter weight if there are any issues with primarily the RH panel closing. I used a M5 Nylok Nut as a weight. This fitted without any rattle and helped a lot regards the panel closing (I did not personally have any issues prior to that but, but this should help). To add further weight there is a 5.5 knock out hole in the lid which will allow for a M5 x 8mm bolt to be bolted through to the nut. The lid is an interference fit but a couple of spots of superglue will add to the longevity of the fix. Any series of washers or combination with a M5 or M4 nut may suffice.
I have always wanted to design some automata. This is my first outing with this genre.
Shark Attack! 3D Printed Automata. A mild-mannered Penguin spies an object in the ocean only for a ferocious shark to lunge out of the depths looking for a meal & snapping its great white teeth!
This has been quite an extensive design engineering challenge to achieve a reliable working design with what is effectively lightweight plastic parts and relatively easy to assemble. There are quite a few components yet they are generally very small and very quick to print.
I did set out at the start of this challenge to produce something that worked and was enjoyable to produce and print. I, therefore, have prioritised towards the adventure rather than value engineering this product. That may well be a future project. I hope you enjoy the experience.
Video1: https://www.youtube.com/watch?v=n3Qxyl6_mQU
Video2: https://www.youtube.com/watch?v=NiBBfYmLVpY&t=22s
Assembly Guide Video: https://www.youtube.com/watch?v=feVB9FN1AXE
Installation Notes:
1.All parts are printable without supports. The majority of parts are printed vertically to optimise the FDM layer strength in the clip details and maximise surface print quality. Where necessary I have included some integral stability feet which will require removal with side cutters after printing. This saves using a raft and hopefully will improve print quality off the build plate.
2.To allow the articulated parts to work most effectively I would suggest a 100% infill. The denser the part the more effective they will work as a counterweight. The non-moving parts I have printed at 25 - 30 % infill.
3.I have included a parts list with infill percentages in the download.
4.Very small parts like the Shark`s Eyes I would suggest gluing for both safety and longevity of the product.
5.Nautilus Punk: If using a dual colour pause process to print side panels the colour change should be set to 3.1 mm.
6.Nautilus Punk-Please note: If using a dual colour printing process as per the uploaded images the repeatability of the clip design might be affected by the dual colour print application. It will still work but the small retention details may part over time.
Filaments Used:
1.Penguin Orange parts: Light Brown PLA by AMZ3D
2.Side Panels: Cobalt Blue by Filamentum PLA
3.White Parts: Amazon Basics Pearl White PLA
4.Black Parts: Amazon Basics Black PLA
5.Shark Body: Amazon Basics Dark Grey PLA
6.Light Blue Parts: Amazon Basics Blue PLA
7.Mechanism: Amazon Basics Silver PLA
Nautilus Punk:
Bronze Colour: Dark Rose Gold Silk PLA by Kehuashina
Silver Colour: Silver Silk PLA by ERYONE
Concentric:
1.Side Panels: Cobalt Blue PLA by Filamentum
2.Orange Feet: Light Brown PLA by AMZ3D
Deep Blue Sea:
1.Side Panels: Cobalt Blue by Filamentum PLA
2.Orange Feet: Light Brown PLA by AMZ3D
The parts can also be fully unassembled (I have provided clip release slots in most parts to aid this)so if you enjoy this product you can use the optional Theme Panel Packs to further enhance\extend the experience.
Best Boothy