Flight Case for Spotmicro
di Kenyer
File stampabili (14)
-
stl30cmEdgeSpotCase.stl
16 Ko · 397 download
-
stlLiggerVoorHalf.stl
13 Ko · 380 download
-
stlSluitrandBovenVoorL.stl
4 Ko · 386 download
-
stlSluitrandBovenZijkantR.stl
4 Ko · 392 download
-
stl
Handvatclip.stl
32 Ko · 382 download
-
stlSluitrandOnderVoorL.stl
14 Ko · 383 download
-
stlStaanderOnder.stl
11 Ko · 389 download
-
stlSluitrandOnderZijkantR.stl
18 Ko · 384 download
-
stlSluitingClasp.stl
36 Ko · 382 download
-
stlSluitingOnder.stl
27 Ko · 386 download
-
stlStaanderBoven.stl
7 Ko · 387 download
-
stlSluitingVanger.stl
43 Ko · 385 download
-
stlFlight_case_corner.stl
201 Ko · 406 download
-
step
Flight_case_Spotmicro.step
674 Ko · 249 download
Descrizione
I designed this box to house my SpotMicro robot with the remote.
The sides are 6mm thick board.
The crews are M4 x 16 sunken bolts except for the hinging part of the clasps, those are M3.
The webbing is 25 mm wide.
The wire for the clasps is made out of 3mm wire (from a cheap old hubcap)
All the yellow strips are printed standing up without support.
The grey corners are printed on their point, with support.
The black clasp parts are printed on their side with support.
The yellow clasps and side handles are printed on their back without support
If you understand Dutch, you can find an instruction video on YouTube: https://youtu.be/XwXxPuvGRwU