Macberry Plus

di Megamemnon

File stampabili (6)

  • stl

    macberryplus_front.stl

    200 Ko · 80 download

    Scarica
  • stl

    macberryplus_case.stl

    223 Ko · 75 download

    Scarica
  • stl

    macberryplus_back.stl

    43 Ko · 71 download

    Scarica
  • stl

    macberryplus_screen_brkt.stl

    31 Ko · 74 download

    Scarica
  • stl

    macberryplus_usb_brkt.stl

    17 Ko · 71 download

    Scarica
  • stl

    macberryplus_full_case.stl

    292 Ko · 89 download

    Scarica

Descrizione

There are better scaled down models of the Macintosh Plus to put a Raspberry Pi in and emulate a vintage Mac, but they all require 3:4 screens. I wanted to design a Raspberry Pi case inspired by the Mac Plus but using current hardware and that meant a 16:9 aspect ratio screen.

Additionally, I didn't want to wait 2 days for the large case to print since it was only going to be filled with air. So I foreshortened it. I'll post the full case at some point as an alternative.

These parts will fit on a 300 x 300 bed when turned appropriately. I used organic supports because they're easy to remove. Everything printed from a single 1KG spool of PLA except for the USB bracket, which I printed with black.

If this also meets your requirements, enjoy.

Parts: