Cactus Passthrough

This is a simple, cactus passthrough! Print for lots of fun!

Filaments used for both the body and spiral: Green PLA by Creality and brown PolyTerra PLA by Polymaker.

Main settings:

1) .2mm layer height.
2) A brim is used for the spiral. I used a 5mm brim with a .1mm separation gap.
3) No supports
4) 15% Gyroid infill for both objects.
5) 2 perimeters(walls).
6) Colour change at layer 30.20(if you're following step 1).

The rest of the settings are pretty standard. All you really need is a finely tuned printer.

If you'd like to support my work, feel free to follow this link: https://buymeacoffee.com/devilish3dprints - your support is very much appreciated :)