Charizard Figure
door albertiny87
Printbare bestanden (19)
-
stlBody.stl
1.8 Mo · 28 912 downloads
-
stlTail.stl
5.1 Mo · 28 847 downloads
-
stlLleg.stl
8.9 Mo · 28 834 downloads
-
stlRarm.stl
3.5 Mo · 28 800 downloads
-
stlFire1.stl
1.9 Mo · 28 789 downloads
-
stlLarm.stl
829 Ko · 28 785 downloads
-
stlRhorn.stl
145 Ko · 28 766 downloads
-
stlLhorn.stl
152 Ko · 28 746 downloads
-
stlTongue.stl
216 Ko · 28 738 downloads
-
stlJaw.stl
1.4 Mo · 28 723 downloads
-
stlFiretail.stl
1.3 Mo · 28 745 downloads
-
stlFire2.stl
13.6 Mo · 28 745 downloads
-
stlHead.stl
3.9 Mo · 28 720 downloads
-
stlRwing.stl
5.5 Mo · 28 691 downloads
-
stlBase.stl
10.4 Mo · 28 893 downloads
-
stlLwing.stl
5.6 Mo · 28 666 downloads
-
stlRleg.stl
8.3 Mo · 28 641 downloads
-
stlChariFull_Fire.stl
4.5 Mo · 19 859 downloads
-
stlChariFull_Body.stl
16.7 Mo · 20 342 downloads
Beschrijving
Many of you asked for it, so here it goes, the complete 1 piece version without cuts, not only the body, also the fire!
I have fixed the size, and the problem with the jaw connection.
With this 3D model, I was trying to make a good looking and easy printable figure, as a gift for my Charizard's lover girlfriend.
Despite a very unstable year, it took me too much time to end the proyect, and it keeps in "things-to-print" chest.
So I want to share my model here, in order to make you possible to print it, and if you want, show me the results.
Thanks for reading, and good printing!