Universal Ball Mount System

door Agger

Printbare bestanden (5)

  • stl

    BallMountSocket.stl

    1.4 Mo · 13 238 downloads

    Downloaden
  • stl

    BallMountSocket2hole.stl

    1.3 Mo · 13 120 downloads

    Downloaden
  • stl

    Ball2.stl

    616 Ko · 13 349 downloads

    Downloaden
  • stl

    DoubleSocket.STL

    2 Mo · 12 893 downloads

    Downloaden
  • stl

    Cap_edit.stl

    628 Ko · 13 051 downloads

    Downloaden

Beschrijving

This is a universal ball and socket system I designed to mount small speakers, but I imagine there could be lots of uses. The center link is a 1/4" X bolt, length to suit.

  • Update: Per Cyclone's suggestion below, I added a double socket piece to make an "elbow". I mocked up what could be a helping-hand device. Thanks Cyclone!

The cap and ball should be flipped over to print (threads up on the cap, hex up on the ball). I used 3 shells for strength. You need to work the threads on and off a few times to get them working freely. Be careful, as you can scrape your knuckles on the sharp edges turning the nut on and off!