Adjustable saw push
door thecadman99
Printbare bestanden (9)
-
stlCenter.stl
103 Ko · 8 236 downloads
-
stlRight_Side.stl
80 Ko · 8 173 downloads
-
stlLeft_Side.stl
67 Ko · 8 173 downloads
-
stlCenterSlide.stl
121 Ko · 8 195 downloads
-
stlHook.stl
57 Ko · 8 156 downloads
-
stlHandle.stl
876 Ko · 8 184 downloads
-
stlSupport.stl
374 Ko · 8 176 downloads
-
stlBrace.stl
74 Ko · 8 174 downloads
-
stlQuarterKnob.stl
735 Ko · 8 165 downloads
Beschrijving
If you want the very best- buy the commercial version. Support the US economy- we need all the help we can get! With that said, you can give an adjustable pusher a try with this print THEN buy the commercial version.
Designed to work with 1/4" carriage bolts, washers and nuts.
You will need:
Carriage bolts- 1/4"
Five- 1" bolts
Two- 1-1/4" inch bolts
Two- 4" bolts
Nine 1/4" nuts
Nine 1/4" washers
Designed for minimal support:
You should only need support when printing parts where the carriage bolts are countersunk into the body, and you may not need that if your bridging working well.
The adjustable centerpiece has a slide down hook for pushing difficult-to-grip piece.
I used shelf liner and super-glued it to the bottom surface- If you find a better material, please comment and share.
If there is enough interest, I will add a thinner fence-side plate.
This design is for testing purposes only- BE SAFE.