Wheel Loader
door champystile
Printbare bestanden (7)
-
stlGodetBas2.stl
1.6 Mo · 2 869 downloads
-
stlGodetBas1.stl
1.7 Mo · 2 758 downloads
-
stlGodetHaut1.stl
1.6 Mo · 2 645 downloads
-
stlGodetHaut2.stl
1.6 Mo · 2 640 downloads
-
stlGodetTresHaut1.stl
1.6 Mo · 2 640 downloads
-
stlGodetTresHaut2.stl
1.5 Mo · 2 644 downloads
-
stlPion.stl
68 Ko · 2 667 downloads
Beschrijving
Parametric model of a wheel loader, with 3 position of the bucket.
For each model you want, print both sides plus 3 pins.
Glue the 3 pin on the first side, then assemble the two parts.
By edditing the original Fusion 360 file (available at http://a360.co/2reDwSw), you can make other bucket positions.
- Godet bas : alphaGodet=90°, alphaBras=136°, LV=9mm
- Godet bas : alphaGodet=50°, alphaBras=50°, LV=11mm
- Godet bas : alphaGodet=125°, alphaBras=50°, LV=9mm
Be sure to change the value 10° by 10° so the sketch solver follow.