Additional Items and Small Changes

door AdamDowns

Printbare bestanden (5)

  • stl

    impellor_With_Nut.stl

    1.1 Mo · 633 downloads

    Downloaden
  • stl

    inlet_adapter.stl

    36 Ko · 610 downloads

    Downloaden
  • stl

    Shaft_Support.stl

    40 Ko · 605 downloads

    Downloaden
  • stl

    Shaft_Support_Cap.stl

    53 Ko · 611 downloads

    Downloaden
  • stl

    Motor_Support.stl

    157 Ko · 604 downloads

    Downloaden

Beschrijving

Modified the Impeller for a 4mm shaft and to allow for a Hex Nut and collar also created an adapter plate and shaft support for a v-hull boat. These use a 4mm Prop Shaft and a 8mm outside diameter bushing with 2 small bearings on each end.

Video of my boat is available at https://youtu.be/U0v5jgUstyM