Working Time Machine
door stevemedwin
Printbare bestanden (15)
-
stlface_.stl
1.4 Mo · 4 316 downloads
-
stlface_numbers.stl
476 Ko · 4 278 downloads
-
stlbushing.stl
149 Ko · 4 258 downloads
-
stlstand_.stl
250 Ko · 4 253 downloads
-
stlstand_letters.stl
411 Ko · 4 243 downloads
-
stlgear_12T.stl
195 Ko · 4 263 downloads
-
stlgear_36T_2.stl
405 Ko · 4 270 downloads
-
stlgear_36T_3.stl
460 Ko · 4 286 downloads
-
stlgear_36T_4.stl
345 Ko · 4 277 downloads
-
stlgear_36T_5.stl
374 Ko · 4 273 downloads
-
stlgear_48T.stl
588 Ko · 4 265 downloads
-
stlmulticolor_gear_rim.stl
331 Ko · 4 244 downloads
-
stlmulticolor_gear_spokes.stl
65 Ko · 4 251 downloads
-
stlsmall_head_bolt.stl
72 Ko · 4 257 downloads
-
stlsmall_head_tool.stl
176 Ko · 4 235 downloads
Beschrijving
This functional thing builds on the gears in my 100HEX Working Gear Kit https://www.thingiverse.com/thing:2789514 to create a working geared clock faceplate. I found a suitable clock mechanism on Amazon [Mudder High Torque Hands Clock Mechanism with 20 mm shaft length http://a.co/2InBecS]. The gears must be turned by hand as the force is too high to have the clock mechanism actually drive them.
I printed this on a multi-material printer, but the face plate and stand can be printed without the inlays and then either left as is or painted later.
For aesthetic reasons, I made the bolt head smaller than in the Working Gear Kit. I've included a new tool to tighten these bolts.
The bushing goes inside the large 48 tooth gear in the center so it can freely spin when you tighten down the clock mechanism nut.
Here's a short video: https://youtu.be/4pt103Zv_Ow