robot hand || bionic hand prosthesis prototype

door Bribro12

Printbare bestanden (30)

  • stl

    index_finger_joint_V1.stl

    4.3 Mo · 25 184 downloads

    Downloaden
  • stl

    little_finger_top_part_V2.stl

    11.6 Mo · 25 023 downloads

    Downloaden
  • stl

    index_finger_middle_part.stl

    15.4 Mo · 25 114 downloads

    Downloaden
  • stl

    servo_mount_V1.stl

    12.8 Mo · 25 064 downloads

    Downloaden
  • stl

    little_finger_joint_V1.stl

    4 Mo · 24 945 downloads

    Downloaden
  • stl

    little_finger_bottom_part_V2.stl

    14.9 Mo · 25 052 downloads

    Downloaden
  • stl

    servo_endstop_V1.stl

    3 Mo · 24 956 downloads

    Downloaden
  • stl

    index_finger_top_part_V1.stl

    12.7 Mo · 24 912 downloads

    Downloaden
  • stl

    servo_mount_V3.stl

    13.9 Mo · 24 986 downloads

    Downloaden
  • stl

    servo_mount_V2.stl

    13 Mo · 24 973 downloads

    Downloaden
  • stl

    hand_palm_V1.stl

    34 Mo · 25 073 downloads

    Downloaden
  • stl

    thumb_top_part_V1.stl

    13.5 Mo · 24 875 downloads

    Downloaden
  • stl

    middle_finger_bottom_part.stl

    19.2 Mo · 24 933 downloads

    Downloaden
  • stl

    middle_finger_joint_V1.stl

    4.4 Mo · 24 851 downloads

    Downloaden
  • stl

    little_finger_middle_part_V2.stl

    13.3 Mo · 24 955 downloads

    Downloaden
  • stl

    little_finger_bottom_part.stl

    15.4 Mo · 24 905 downloads

    Downloaden
  • stl

    little_finger_top_part.stl

    11.4 Mo · 24 781 downloads

    Downloaden
  • stl

    ring_finger_joint_V1.stl

    4.4 Mo · 24 777 downloads

    Downloaden
  • stl

    ring_finger_top_part.stl

    10.6 Mo · 24 773 downloads

    Downloaden
  • stl

    index_finger_bottom_part.stl

    20.1 Mo · 24 914 downloads

    Downloaden
  • stl

    middle_finger_top_part.stl

    13 Mo · 24 876 downloads

    Downloaden
  • stl

    thumb_bottom_part_V1.stl

    2.7 Mo · 24 767 downloads

    Downloaden
  • stl

    thumb_middle_part_V1.stl

    16.5 Mo · 24 860 downloads

    Downloaden
  • stl

    little_finger_middle_part.stl

    13.4 Mo · 24 743 downloads

    Downloaden
  • stl

    ring_finger_middle_part.stl

    11.4 Mo · 24 723 downloads

    Downloaden
  • stl

    middle_finger_middle_part.stl

    15.5 Mo · 24 841 downloads

    Downloaden
  • stl

    ring_finger_bottom_part.stl

    16.2 Mo · 24 819 downloads

    Downloaden
  • stl

    arm.stl

    1000 Ko · 24 659 downloads

    Downloaden
  • stl

    arm_hand_connector.stl

    8 Mo · 24 653 downloads

    Downloaden
  • stl

    stand_V1.stl

    7.4 Mo · 24 622 downloads

    Downloaden

Beschrijving

Video can be found here: https://www.youtube.com/watch?v=Qu_x8T9408U

STL and Fusion 360 source files can be found here: https://bbprojects.technology/collections/stl-fusion-360-source-files/products/robot-hand-bionic-hand-prosthesis-prototype

This bionic hand is controlled by an arduino nano V3 and uses 4 15kg servo's to move the index, middel, ring and little finger and 3 9g servo's to rotate the thumb and pull the tumb and the fingers open. This bionic hand it's structure is modelled after my hand so I could make a gel10 mold that would fit snug around it. I originally wanted to integrate some force feedback in the finger tips by using some small pushbuttons but that didn't turn out to well because the wires from the pushbuttons in combination with the gel10 mold caused to much friction in the joints of the fingers and the fingers had to push to hard to activate the pushbuttons. I'm now going to do some tests with currentsensors so I can messure the current going to the servo's and when the current goes above the normal level then the servo's would stop (that's the idea).

More info can be found here: https://hackaday.io/project/102439-robot-hand-bionic-hand-prosthesis-prototype

Components used:

4 × 15kg Servo's
link: https://www.banggood.com/MG995-High-Torgue-Mental-Gear-Analog-Servo-p-73885.html?rmmds=search&cur_warehouse=CN

1 × 2.54mm Single Row Male Pin Header Strip For Arduino
link: https://www.banggood.com/10-Pcs-40-Pin-2_54mm-Single-Row-Male-Pin-Header-Strip-For-Arduino-p-918427.html?rmmds=search&cur_warehouse=CN

2 × 9g servo's
link: https://www.banggood.com/TowerPro-SG90-Mini-Gear-Micro-Servo-9g-For-RC-Airplane-Helicopter-p-1009914.html?p=E01411629100201406T1&custlinkid=359550

1 × arduino nano V3
link: https://www.banggood.com/Geekcreit-ATmega328P-Nano-V3-Module-Improved-Version-With-USB-Cable-Development-Board-For-Arduino-p-933647.html?p=E01411629100201406T1&custlinkid=255135

1 × DC-DC Step Down Adjustable Constant Voltage Current Power Supply Module
link: https://www.banggood.com/LM2596-DC-DC-Verstellbar-Step-Down-Schaltregler-Power-Supply-Module-p-88252.html?p=E01411629100201406T1&custlinkid=255154

1 × 2S lipo 7.4V
link: https://www.banggood.com/7_4V-2S-2000mAh-8C-Lipo-Battery-Compatible-for-Frsky-ACCST-Taranis-Q-X7-Transmitter-p-1249125.html?p=E01411629100201406T1&custlinkid=669244

2 × 5mm red LED
link: https://www.banggood.com/Geekcreit-375pcs-3MM-5MM-LED-Light-Emitting-Diode-Beads-Resistance-Lights-Kits-Bulb-Lamp-p-1027601.html?p=E01411629100201406T1&custlinkid=669272

2 × pushbutton
link: https://www.banggood.com/100pcs-Mini-Micro-Momentary-Tactile-Tact-Switch-Push-Button-DIP-P4-Normally-Open-p-917570.html?p=E01411629100201406T1&custlinkid=669260

2 × 200 ohm resistor
link: https://www.banggood.com/Wholesale-Geekcreit-600pcs-30-Kinds-Value-1-14W-Metal-Film-Resistor-Assorted-Kit-20pcs-Each-Value-p-53320.html?rmmds=search&cur_warehouse=CN

3 × springs from old pens

1 × 1mm diameter steel rod or similar as shafts for the fingers

1 × nylon wire

1 × somewhat larger spring but less stiff as the springs from the pens
this spring brings the thumb back to it's original position. I just used one I had lying around and I thought was gonna work

Recommended Tools:

3D-printer: https://www.banggood.com/Creality-3D-Ender-3-Pro-V-slot-Prusa-I3-DIY-3D-Printer-Kit-p-1346320.html?p=E01411629100201406T1&custlinkid=677427

Paypal: https://paypal.me/BrockenBrian

Feel free to take a look at my other designs:

3D printable antweight battlebot: Bulldog: https://www.thingiverse.com/thing:4623536
SpaceX inspired edf rocket: https://www.thingiverse.com/thing:4606751
3D printed high torque servo/gearbox version 2: https://www.thingiverse.com/thing:4547703
UMC - Universal motion controller: https://www.thingiverse.com/thing:4245315
3D-printable Davinci catapult gift card: https://www.thingiverse.com/thing:4067668
Arduino controlled photogrammetry 3D-scanner: https://www.thingiverse.com/thing:3958326
Fully 3D-printable turntable: https://www.thingiverse.com/thing:3723618
RC FPV tank rover: https://www.thingiverse.com/thing:3587738
Fully 3D-printable wind-up car gift card: https://www.thingiverse.com/thing:3308710
3D-printable High torque servo/gear reduction: https://www.thingiverse.com/thing:3292860
'BOOM box' high voltage capacitor bank case: https://www.thingiverse.com/thing:2980012
Subby the interactive youtube subscriber robot: https://www.thingiverse.com/thing:2928254
robot hand || bionic hand prosthesis prototype: https://www.thingiverse.com/thing:2838239
3D-printable linear actuator: https://www.thingiverse.com/thing:2783959
Mini 3D-printable crossbow: https://www.thingiverse.com/thing:2710472
8 legged spider robot: https://www.thingiverse.com/thing:2470882
best 3D-printable bearing: https://www.thingiverse.com/thing:2349065

Have a nice day!

Tags

#3d printable #arduino #Arduino Nano #bionic hand #cyborg #diy #future #futuristic #human #humanoid #humanoid hand #humanoid arm #mechatronics #printable prosthetics #prosthesis #prosthetic #prosthetics #prosthetic arm #Prosthetic hand #pushbutton #realistic #robot #robot hand #robotics #robots #robot arm #servo #servos