Pac-Man Ghost

door chandelier2032

Printbare bestanden (5)

  • stl

    Ghost-eyes.stl

    315 Ko · 20 895 downloads

    Downloaden
  • stl

    Ghost.stl

    4.5 Mo · 21 109 downloads

    Downloaden
  • stl

    Ghost-withStem.stl

    5.4 Mo · 20 490 downloads

    Downloaden
  • stl

    ScaredGhost.stl

    4.5 Mo · 20 693 downloads

    Downloaden
  • stl

    ScaredGhost-withStem.stl

    5.4 Mo · 20 440 downloads

    Downloaden

Beschrijving

In trying to print the PacMan Maze, (https://www.thingiverse.com/thing:2805680), I wasn't quite happy with the ghosts being used so I set about modelling my own. I wanted to be truer to the original (Only 3 bottom ripples when viewed face on) and add a bit more flair. So here's my design.

I made the eyes as a separate piece that pops right into the model so you can print that part using white filament.

I've uploaded 2 variant of the model. One Hollow and one with a central stem that can accommodate a 1/8 magnet.

I printed the regular Ghost without any support.

I also uploaded a scary ghost version (when they turn blue). That one most definitely need support. the mouth was filled with caulking