scale armor

Should use the tech of 3D printing on fabric.

I don't like to pause during printing. Because if it takes a long time to fix the fabric, it may cause the printer to stop.

I use simplify3D to separate it into two processes, one is from 0.00 to 0.06mm, another is from 0.06mm. (see fig2,fig3)

Print one by one.
After printed process 1, you can fix the fabric on it and then print process 2.

After the print is complete, the armor can be stitched or glued to the sleeve.

You can find some “fabric glue” online.

This armor can resist knife cutting. I didn’t expect it before.
https://youtu.be/z_hGDmySsHk

Print with PLA-carbon fiber

For details, read my blog https://goldengrape.github.io/posts/bulabula/3D_printed_armor/
It was written in Chinese, but google translate should work.

update:

inspired by Shiv Babber https://www.thingiverse.com/thing:2807633
add the fusion 360 f3d file.

Expecting your remix!