Leather splitter
door parva_donum
Printbare bestanden (5)
-
stlBase.STL
58 Ko · 2 068 downloads
-
stl
Slider_8.7.STL
63 Ko · 2 006 downloads
-
stl
Slider_8.3.STL
85 Ko · 1 996 downloads
-
stl
Bladeholder.STL
35 Ko · 1 988 downloads
-
stl
Washer.STL
25 Ko · 1 989 downloads
Beschrijving
Leather splitter for leather straps with widths up to about 30 mm. Thickness can be varied with two blocks.
Assembly requires the following:
2 pc M3x20 screw
2 pcs M3 nut
4 pc M3 washer
1 pc "Stanley 1992" blade
When using, make sure to press down on the blade with one finger so that the cut is even. Also make sure the leather is fed straight in from the front.