SquareBOT 3D printer
door Lehaiver
Printbare bestanden (13)
-
stlbelt_fix_right_1pcs.STL
96 Ko · 3 441 downloads
-
stlbelt_fix_left_1pcs.STL
97 Ko · 3 424 downloads
-
stlsquarebot_logo.STL
35 Ko · 3 426 downloads
-
stlrod_mount_10mm_3pcs.STL
121 Ko · 3 354 downloads
-
stlnema11_mount_1pcs.STL
165 Ko · 3 353 downloads
-
stltop_pulley_mount_2pcs.STL
167 Ko · 3 338 downloads
-
stlz-slide_left_1pcs.STL
183 Ko · 3 328 downloads
-
stlz-slide_right_1pcs.STL
184 Ko · 3 311 downloads
-
stlpulley_rod_mount_1pcs.STL
122 Ko · 3 256 downloads
-
stl90_degree_fix.STL
34 Ko · 3 271 downloads
-
stltop_profile_insert.STL
33 Ko · 3 256 downloads
-
stltop_insert_2pcs.STL
45 Ko · 3 218 downloads
-
stlprofile_insert_8pcs.STL
16 Ko · 3 200 downloads
Beschrijving
Archive model. Not recommended for repetition.
Actual version: http://www.thingiverse.com/thing:1731160
The project is done!
The printable area is 247 x 257 x 193mm (XYZ) (a standard MK2 hotbed at this moment).
Z-axis may be any height and depends on the belts and vertical rods lenght.
To reduce the cost of construction I changed the motor mount on Z-axis for a standard Nema17 stepper motor (without gearbox) and the counterweight system: http://www.thingiverse.com/thing:798622
But with the geared motor Z-axis also works fine.
In this thing where is only Z-axis printable parts.
X and Y-axis parts are the same (except extruder mount on the block carriage). Download them here:
http://www.thingiverse.com/thing:479294 - for lightweight alum profile.
http://www.thingiverse.com/thing:637350 - for standard alum profile.
New "SB47" Extruder: https://www.thingiverse.com/thing:2658691
Extruder with geared Nema17 stepper: http://www.thingiverse.com/thing:516415
Extruder with Nema17 motor (without gearbox): http://www.thingiverse.com/thing:798580
PSU cover and fixers: http://www.thingiverse.com/thing:628747
New addon: http://www.thingiverse.com/thing:1014014
SolidWorks 2013 files of the SquareBOT (this version): https://grabcad.com/library/squarebot-3d-printer-2