CO2 Cradle
door Asterchades
Printbare bestanden (5)
-
stlCO2_x3.stl
887 Ko · 1 103 downloads
-
stlCO2_x4.stl
1.1 Mo · 1 056 downloads
-
stlCO2_x5.stl
1.2 Mo · 1 108 downloads
-
stlCO2_x6.stl
1.4 Mo · 1 121 downloads
-
stlCO2_x5_w-6.5.stl
222 Ko · 421 downloads
Beschrijving
Update 220109: On request, added a five-bulb variant with provision for a 6.5mm allen key (CO2 x5 w-6.5.stl). This is based on the low-poly version I've been experimenting with.
A relatively straight forward cradle to hold three, four, five, or six 12g CO2 bulbs, as used for gas powered Airsoft or Gel Blasters, in addition to a 6mm allen key. Keeps your bulbs together and relatively secure when transporting or on the field.
Pictured is the 5-bulb variant.
NB STL file sizes are a bit large due to excessive geometry in the curves. I may revisit these later to reduce the complexity as it is almost entirely superfluous, depending upon popularity and feedback.