Stacking bins

door AustinDavid

Printbare bestanden (13)

  • stl

    modular_stacker_g3_-_bin.stl

    291 Ko · 209 downloads

    Downloaden
  • stl

    modular_stacker_g3_2x_deep_-_bin_1.stl

    280 Ko · 204 downloads

    Downloaden
  • stl

    modular_stacker_-_lid.stl

    116 Ko · 243 downloads

    Downloaden
  • stl

    modular_stacker_g1_-_lid.stl

    116 Ko · 242 downloads

    Downloaden
  • stl

    modular_stacker_g2_-_lid.stl

    116 Ko · 248 downloads

    Downloaden
  • stl

    modular_stacker_-_bin.stl

    260 Ko · 248 downloads

    Downloaden
  • stl

    modular_stacker_g2_-_bin.stl

    282 Ko · 254 downloads

    Downloaden
  • stl

    modular_stacker_g1_-_bin.stl

    260 Ko · 257 downloads

    Downloaden
  • stl

    simple_stacker_0.5.stl

    679 Ko · 248 downloads

    Downloaden
  • stl

    simple_stacker_4in.stl

    2 Mo · 256 downloads

    Downloaden
  • stl

    modular_stacker_g-1_-_lid.stl

    116 Ko · 234 downloads

    Downloaden
  • stl

    modular_stacker_g-1_-_bin.stl

    260 Ko · 241 downloads

    Downloaden
  • stl

    modular_stacker_g2_5cm_deep_-_bin_1.stl

    260 Ko · 204 downloads

    Downloaden

Beschrijving

I made some "simple" stacking bins for my wife's sewing things (like little clips and pins and whatnot). Very clean design, easy to print, easy to use. Includes two sizes -- one about 4" on a side, and a 1/2-size version so 2 small ones can stack on the larger.

I made a more sophisticated (and boxier) part for my own garage use. This design is modular, I can blow them up pretty large. Smaller generations will stack 2-per-layer on the next larger size. Each size includes a matching "lid" if needed, though realistically I'll probably only use the lid for the smaller sizes.

I've only made 1 depth (about 2cm + the ledge) but can fire up deeper models if anyone needs.