Easter Bunny

Included are decorative Easter bunnies with fluffy tails to place in various sizes:

• Size S: 100 mm height
• Size M: 125 mm height
• Size L: 150 mm height

The thickness of a figure is 17.5 mm (without tail).

Filament change is required so that the body and tail have different colors:

• 0.0 - 17.5 mm: Color 1
• from 17.5 mm: Color 2

The filament/color change using PrusaSlicer is described here: https://help.prusa3d.com/article/color-change_1687

To get the look of a fluffy tail, you can try the "Fuzzy skin" option in PrusaSlicer, for example. This can be found under Print Settings ➝ Layers and perimeters ➝ Fuzzy skin (experimental). I use the following settings for this option:

• Fuzzy Skin: Outside walls
• Fuzzy skin thickness: 0.3 mm
• Fuzzy skin point distance: 0.8 mm

In the pictures you can see a before and after comparison. Feel free to try other values as well :)

On Printables.com (https://www.printables.com/model/423598) you will find the stl files as well as 3mf and gcode files of the Easter bunnies. In addition, you can find there other variants (body and tail separately).