Milleniumm Falconn
door Mczapla
Printbare bestanden (15)
-
stlRepairedFront.stl
9.1 Mo · 1 211 downloads
-
stlRepairedRear.stl
14.6 Mo · 1 254 downloads
-
stlDish.stl
3.4 Mo · 1 081 downloads
-
stlDockLeft.stl
437 Ko · 1 055 downloads
-
stlDockRight.stl
501 Ko · 1 052 downloads
-
stlSeats_v7.stl
350 Ko · 1 053 downloads
-
stlWindows.stl
576 Ko · 1 056 downloads
-
stlCabin_v7.stl
338 Ko · 1 048 downloads
-
stlGuns.stl
1.2 Mo · 1 045 downloads
-
stlFront_Pistons.stl
88 Ko · 1 040 downloads
-
stlRearPistons.stl
176 Ko · 1 041 downloads
-
stlPistonBlock.stl
36 Ko · 1 036 downloads
-
stlPan.stl
79 Ko · 1 028 downloads
-
stlFoot.stl
40 Ko · 1 058 downloads
-
stlLocatingPins.stl
20 Ko · 1 042 downloads
Beschrijving
This is a remix of the excellent highly detailed model from aaskedall who designed his model for a resin printer. I wanted to try printing it on a P1S so this version was divided up to be printed vertically. The front and rear halves stand tall on the bed and care should be taken to prevent warping. They are joined together later with locating pins. The landing gear had to be redesigned with detailed parts printed separately for assembly. The guns were also tweaked for FDM printing. Cabin seat area can be hand painted. Everything was assembled with super glue. When slicing, resize as necessary for your printer. Mine is approx 11.5 inches across.
Here is the original model:
https://www.thingiverse.com/thing:6721821