Steering Wheel Optical Encoder Mount

door b0obl9sh

Printbare bestanden (4)

  • stl

    optical_encoder_mount.stl

    115 Ko · 252 downloads

    Downloaden
  • stl

    encoder_gear.stl

    555 Ko · 231 downloads

    Downloaden
  • stl

    motor_gear.stl

    2.1 Mo · 228 downloads

    Downloaden
  • step

    encoder_mount_with_gears.step

    2.8 Mo · 179 downloads

    Downloaden

Beschrijving

Optical encoder mount with a gear set to transfer torque to the encoder.
Gear ratio: 1:4.

  • The motor gear is aligned using the standard rear cover mounting holes and secured with M4 bolts.
  • On the motor shaft, the encoder mount is held with an M5 bolt and clamped using a captive nut.
  • On the encoder shaft, the gear is secured with an M3 bolt and clamped using a captive nut (the nut needs slight grinding to fit)

Resolution / FFBeast settings:

  • PPR = 600 → CPR = 2400 (quadrature x4)
  • With 1:4 step-up: Encoder CPR (FFBeast) = 2400 × 4 = 9600

Tags

#ffbeast #Optical Encoder #simracing #Steering wheel