Screwdriver

por Kezat

Ficheiros imprimíveis (9)

  • stl

    End_cap_v2.5.stl

    284 Ko · 463 descargas

    Descarregar
  • stl

    Bit_driver_v2.5.stl

    955 Ko · 469 descargas

    Descarregar
  • stl

    Bit_driver_hexkey.stl

    659 Ko · 1 365 descargas

    Descarregar
  • stl

    t_han_stem_1_5mm_v2.stl

    243 Ko · 1 302 descargas

    Descarregar
  • stl

    t_han_stem_2mm_v2.stl

    245 Ko · 1 305 descargas

    Descarregar
  • stl

    t_han_stem_2.5mm_v2.stl

    246 Ko · 1 302 descargas

    Descarregar
  • stl

    t_han_stem_3mm_v2.stl

    248 Ko · 1 306 descargas

    Descarregar
  • stl

    t_han_stem_4mm_v2.stl

    234 Ko · 1 309 descargas

    Descarregar
  • stl

    Bit_driver_v2.5_no_end_cap.stl

    901 Ko · 439 descargas

    Descarregar

Descrição

A compact screw driver with a rotating palm rest.

This uses a 4x4x11mm magnet to hold the bit in place. If you don't have the size of magnet then glue could be used for more permanent assembly.
I recommend 2 or more perimeters for the screw driver and to print the endcap solid 100% infill or a high perimeter count.

I have been using this almost daily now for 4 years, I have been really happy with the look and feel.

If you have a magnet you wish to use let me know the size and I will mod it for you.

2-7-20: Uploaded slightly longer version of the screwdriver to better grip the bit.
2-7-20: Added ribs for the end cap to prevent it unscrewing itself.
1-8-18 Removed old version of swivel end cap.
1-8-18: Added a version that can hold a hex key and the stem parts. Thanks Andrux51 for the idea.
3-15-16: Added a version without the palm rest swivel end cap.
3-16-16: Added V2 with a screw on two part end cap that is less prone to breakage.

Etiquetas

#drill bit #Hand tool #Screw Driver