Support material gap carousel
por CreativeTools
Ficheiros imprimíveis (11)
-
stlSupport_material_gap_carousel_0.25.stl
1.2 Mo · 1 571 descargas
-
stlSupport_material_gap_carousel_0.30.stl
1.2 Mo · 1 577 descargas
-
stlSupport_material_gap_carousel_0.20.stl
1.2 Mo · 1 585 descargas
-
stlSupport_material_gap_carousel_0.15.stl
1.2 Mo · 1 563 descargas
-
stlSupport_material_gap_carousel_0.10.stl
1.2 Mo · 1 587 descargas
-
stlSupport_material_gap_carousel_0.05.stl
1.3 Mo · 1 559 descargas
-
stlSupport_material_gap_carousel_0.35.stl
1.2 Mo · 1 568 descargas
-
stlSupport_material_gap_carousel_0.45.stl
1.2 Mo · 1 552 descargas
-
stlSupport_material_gap_carousel_0.40.stl
1.2 Mo · 1 554 descargas
-
stlSupport_material_gap_carousel_0.50.stl
1.2 Mo · 1 554 descargas
-
stlSupport_material_gap_carousel_v04_complete.stl
10.6 Mo · 1 757 descargas
Descrição
A carousel of sample shapes with different horizontal gaps to evaluate optimal distances for support material design.
This gauge was inspired by the designs "Sealed Ball Bearing" and "Fully assembled 3D printable wrench" by Thigiverse member barspin, where the necessary support structures where created in the CAD software with a certain gap of air.
With this gauge one can easily test the different adherence between the support surfaces and the 3D model ranging from 0.05 mm to 0.5 mm in steps of a twentieth of a millimetre.
Since 3D print tolerances can vary according to variations in 3D print settings and filament diameter, this gauge can be used to evaluate the best support gap before 3D modelling the structures in CAD.
Barspins original things can be found as follows:
- http://www.thingiverse.com/thing:143494
- http://www.thingiverse.com/thing:139268
- http://www.thingiverse.com/barspin/designs/
By Creative Tools