Raspberry Pi Zero Case
por FilW
Ficheiros imprimíveis (21)
-
stlRPi_Zero_Case_-_Top_-_Heat_Sink.stl
84 Ko · 8 669 descargas
-
stlRPi_Zero_Case_-_Top.stl
82 Ko · 8 535 descargas
-
stlRPi_Zero_Case_-_Bottom.stl
70 Ko · 8 729 descargas
-
stlRPi_Zero_Case_-_Base_-_1.2_1.3_W.stl
82 Ko · 8 339 descargas
-
stlRPi_Zero_Case_-_Base_-_Standoff_-_1.2_1.3_W.stl
124 Ko · 8 391 descargas
-
stlRPi_Zero_Case_-_Base_-_Open_GPIO_-_Standoff_-_1.2_1.3_W.stl
126 Ko · 8 357 descargas
-
stlRPi_Zero_Case_-_Base_-_Open_GPIO_-_1.2_1.3_W.stl
82 Ko · 8 270 descargas
-
stlRPi_Zero_Case_-_Top_-_1.2_1.3_W.stl
128 Ko · 8 254 descargas
-
stlRPi_Zero_Case_-_Top_-_Heat_Sink__-_Open_HDMI_-_W.stl
129 Ko · 8 238 descargas
-
stlRPi_Zero_Case_-_Top_-_Heat_Sink_-_Open_GPIO_-_W.stl
130 Ko · 8 281 descargas
-
stlRPi_Zero_Case_-_Top_-_Heat_Sink_-_W.stl
128 Ko · 8 230 descargas
-
stlRPi_Zero_Case_-_Top_-_Open_HDMI_-_1.2_1.3_W.stl
129 Ko · 8 186 descargas
-
stlRPi_Zero_Case_-_Top_-_Heat_Sink__-_Open_HDMI_-_1.2_1.3.stl
130 Ko · 8 189 descargas
-
stlRPi_Zero_Case_-_Top_-_Heat_Sink_-_Open_GPIO_-_Open_HDMI_-_W.stl
130 Ko · 8 232 descargas
-
stlRPi_Zero_Case_-_Top_-_Vented_-_Open_HDMI_-_1.2_1.3_W.stl
133 Ko · 8 252 descargas
-
stlRPi_Zero_Case_-_Top_-_Heat_Sink_-_Open_GPIO-_1.2_1.3.stl
130 Ko · 8 194 descargas
-
stlRPi_Zero_Case_-_Top_-_Open_GPIO_-_Open_HDMI_-_1.2_1.3_W.stl
130 Ko · 8 182 descargas
-
stlRPi_Zero_Case_-_Top_-_Heat_Sink_-_Open_HDMI_-_1.2_1.3.stl
129 Ko · 8 183 descargas
-
stlRPi_Zero_Case_-_Top_-_Heat_Sink_-_Open_GPIO_-_Open_HDMI_-_1.2_1.3.stl
131 Ko · 8 196 descargas
-
stlRPi_Zero_Case_-_Top_-_Vented_-_1.2_1.3_W.stl
137 Ko · 8 240 descargas
-
stlRPi_Zero_Case_-_Top_-_Open_GPIO_-_1.2_1.3_W.stl
129 Ko · 8 179 descargas
Descrição
UPDATE: 2017-Mar-16
New case options added - Now supporting the RPi Zero W with onboard Wifi & Bluetooth.
Mounting holes resized for M3 nuts & bolts - m2.5 are difficult to source. I use clear nylon nuts and bolts which allow the activity LED to shine through the nearest bolt. The standard RPi mounting hole is M2.5 but with a little care can easily be enlarged for M3.
New options for the Base Plate;
Open or recessed GPIO, Flush mount or 0.75mm stand-offs for air flow.
Many new options for the Top Plate;
Open or Closed GPIO,
Open or closed hole for heat sink (the new W has the CPU slightly relocated, the W versions take this into account).
Open or Recessed HDMI
1.2 - RPi Zero - Original
1.3 - RPi Zero with camera connector
W - RPi Zero with camera connector, WiFi and Bluetooth.
A basic protective case for the Raspberry Pi Zero original (v1.2) and and the newer v1.3 with camera connector.
Two options for the top section - Cutout for a heat sink or standard with no cutout.
Easy access to Micro SD card and camera connector - no need to dismantle.
There is a cutout on both sections to allow access to the GPIO, Reset and Composite Video Out Pins.