PowerBot 3D Printer

por PowerPlayground

Ficheiros imprimíveis (36)

  • stl

    x1Tube_Bracket_Tall.stl

    116 Ko · 2 332 descargas

    Descarregar
  • stl

    OptionalSwitch_Holder.stl

    62 Ko · 2 307 descargas

    Descarregar
  • stl

    OptionalVslotEndcaps.stl

    41 Ko · 2 354 descargas

    Descarregar
  • stl

    x1Ramps1_4Enclosure.stl

    418 Ko · 2 384 descargas

    Descarregar
  • stl

    x1Ramps1_4Lid.stl

    356 Ko · 2 387 descargas

    Descarregar
  • stl

    x1Belt_Clamps_RevB.stl

    102 Ko · 2 347 descargas

    Descarregar
  • stl

    x2Tube_Bracket_Tall.stl

    116 Ko · 2 304 descargas

    Descarregar
  • stl

    x22x1_Plate.stl

    46 Ko · 2 307 descargas

    Descarregar
  • stl

    x1Motor_Mount_Left.stl

    282 Ko · 2 286 descargas

    Descarregar
  • stl

    x1Motor_Mount_Right.stl

    264 Ko · 2 294 descargas

    Descarregar
  • stl

    x1Rear_Idler_Left.stl

    339 Ko · 2 305 descargas

    Descarregar
  • stl

    x1Rear_Idler_Right.stl

    330 Ko · 2 292 descargas

    Descarregar
  • stl

    x23_Wheel_XY_Backer.stl

    367 Ko · 2 350 descargas

    Descarregar
  • stl

    x1H-Bar_Left.stl

    565 Ko · 2 349 descargas

    Descarregar
  • stl

    x1H-Bar_Right.stl

    595 Ko · 2 368 descargas

    Descarregar
  • stl

    x1X_Endstop_Flange.stl

    25 Ko · 2 313 descargas

    Descarregar
  • stl

    x1OpenBuild_M3_t-nuts.stl

    4.3 Mo · 2 299 descargas

    Descarregar
  • stl

    z-endstop_screwmount.stl

    24 Ko · 2 289 descargas

    Descarregar
  • stl

    powerbot_xendstopv2.stl

    73 Ko · 1 972 descargas

    Descarregar
  • stl

    abnut_mount.stl

    108 Ko · 1 984 descargas

    Descarregar
  • stl

    mating_plate.stl

    114 Ko · 1 982 descargas

    Descarregar
  • stl

    idler_pulley_mounts.stl

    121 Ko · 1 979 descargas

    Descarregar
  • stl

    acme_mount.stl

    170 Ko · 1 975 descargas

    Descarregar
  • stl

    belt_thumb.stl

    579 Ko · 1 971 descargas

    Descarregar
  • stl

    stepper_mount.stl

    129 Ko · 1 982 descargas

    Descarregar
  • stl

    rear_3rd_608zz_clamp.stl

    93 Ko · 1 974 descargas

    Descarregar
  • stl

    608zz_clamp.stl

    202 Ko · 1 975 descargas

    Descarregar
  • stl

    8mmcollar.stl

    280 Ko · 1 964 descargas

    Descarregar
  • stl

    rear_bottom_mount.stl

    70 Ko · 1 960 descargas

    Descarregar
  • stl

    pulley_spacer.stl

    424 Ko · 1 969 descargas

    Descarregar
  • stl

    belt_conn.stl

    532 Ko · 1 963 descargas

    Descarregar
  • stl

    Bearing_holder_back_1.stl

    273 Ko · 1 969 descargas

    Descarregar
  • stl

    Rod_holder_b_3.stl

    79 Ko · 1 957 descargas

    Descarregar
  • stl

    Rod_holder_a_3.stl

    79 Ko · 1 962 descargas

    Descarregar
  • stl

    Bearing_holder_front_right_1.stl

    251 Ko · 1 964 descargas

    Descarregar
  • stl

    Bearing_holder_front_left_1.stl

    251 Ko · 1 957 descargas

    Descarregar

Descrição

This is my own modified version of the D-Bot printer. I have designed / modified a part or two myself, and some other parts are ones I found off of thingiverse. (If I forgot to or miscredited a model, let me know!)

This build comes in at around $750-$800. I wanted to spec this printer to be able to print exotic materials at high accuracy with little to no compromises and maximum reliability.

I have been filming my progress building this 3D Printer on my Youtube channel Power Playground! Check out the 3D Printer VLOG video playlist: https://www.youtube.com/playlist?list=PLMjfntGK5aY5IezSYz-a1cjPudUg71Mld

Original Part Sources:
D-Bot Printer: http://www.thingiverse.com/thing:1001065
D-Bot 3-Wheel Titan Carriage: http://www.thingiverse.com/thing:1833149
D-Bot 3-Wheel Titan Carriage Backer: http://www.thingiverse.com/thing:1833172
3-Wheel H-Bar Left: http://www.thingiverse.com/thing:1833099
3-Wheel H-Bar Right: http://www.thingiverse.com/thing:1833260
D-Bot 3-Wheel H-Bar Backer: http://www.thingiverse.com/thing:1833072
3-wheeled Z guide: http://www.thingiverse.com/thing:1802733
Adjustable bed holders: http://www.thingiverse.com/thing:1716262
Double beefy corner: http://www.thingiverse.com/thing:1859281
Mini Smart LCD Case: http://www.thingiverse.com/thing:320117
Ramps 1.4 Enclosure - http://www.thingiverse.com/thing:1352320
V-Slot Tubing Clip: http://www.thingiverse.com/thing:1232213
T-Nuts for cable organization / LCD mounts http://www.thingiverse.com/thing:1064782
Dbot 8mm z rod system: https://www.thingiverse.com/thing:2241762

All credit for the original C-Bot design goes to cfeniak.
Thanks to those who contributed at http://www.openbuilds.com/threads/c-bot.726/

The changes made from the original D-Bot are as follows:
-Overhauled the carriage system to use 3 wheels per carriage instead of 4. (Easier to tension)
-Replaced the bowden extruder setup with a direct drive e3d Titan extruder setup.
-Beefed up the build platform carriage, added in adjustable bed holders, and implemented Anti Backlash nuts for the Z acme lead screws.
-Upgraded stepper motor drivers and added an LCD / SD card reader.
-Reduced the amount of special hardware needed.
-Some other things I am forgetting at this time. :P

Future Changes:
-Modify H-Bar and Extruder blacking plates to allow room for the aluminum shim / spacer.
-Modify H Bar belt pulley pathways to have the corner chamfered / filet to allow easier installation of GT2 belts
-Change LCD mount
-Make some minor changes to the marlin firmware for the e3d extruder / hotend and the DRV 8825 stepper drivers.

Etiquetas

#3d printer #cbot #corexy #Core XY #dbot #reprap