BPS Rocket Cradle
por JoeBarnard
Ficheiros imprimíveis (6)
-
stl20mm_Extension.stl
227 Ko · 2 748 descargas
-
stlBase_Logo.stl
231 Ko · 2 764 descargas
-
stlSmall_V.stl
61 Ko · 2 780 descargas
-
stlLarge_V.stl
61 Ko · 2 775 descargas
-
stlBase_No_Logo.stl
221 Ko · 2 795 descargas
-
stl10mm_-_Extension.stl
227 Ko · 2 692 descargas
Descrição
Product description:
https://youtu.be/LRB1dXVIjbA
Use this mount to hold your model rockets for display or work! Both the large and small V mounts will hold most low and mid power model rockets. You can also use the 10mm or 20mm extensions if you need more room for fin clearance or otherwise. I recommend the BPS branded base, but feel free to use the non-branded mount, or add your own logo to the STL file!
If you want to design your own top component to fit on the base, I recommend using the CAD drawing in the photos for reference. Start with a 30mm square, add 4 evenly spaced 3.5mm holes between the center and each edge, put one in the center and extrude 5-10mm. Then chamfer the corners 5mm to exactly match the base and you're all set. Let me know if you have any questions!