Container ship

por nivs1978

Ficheiros imprimíveis (66)

Descrição

Container ship scale 1:200
Many parts were designed for 0.4 mm nozzle, so printing at any smaller scale might ruin the small details (like the rails).
The hull is in U and D pieces to print on smaller printers. A complete hull and a hull separated in a bottom and top is included if you want to cut it yourself.
Glue all D parts and then all U parts separately. Then glue the combined U and D together.
Glue all the floors with the bridge on top and bridge wings.
Glue the complete house on the hull, use the photos for reference. Finally glue the rails and fittings. The chimney is cut in 3 parts to print multi color, but a complete chimney is also included if you just want one color or want to cut your self.
Print 4 life boats, 8 life boat arms, and two bridge wings. Two anchors, 4 pipes, 4 antenna booms and 3 radars. If you want to fill the ship with containers, you need about 600 !!!

Etiquetas

#container #ship #vessel