Solder help

por xathanasiusx

Ficheiros imprimíveis (3)

  • stl

    Grundplatte.stl

    463 Ko · 1 725 descargas

    Descarregar
  • stl

    Schieber.stl

    300 Ko · 1 717 descargas

    Descarregar
  • stl

    Deckel.stl

    256 Ko · 1 714 descargas

    Descarregar

Descrição

4 printed parts and two springs are needed. The springs should have a diameter of less than 7 mm and ideally a minimium length larger than 6,5 mm and a prestressed length of 11,5 mm. But I used two simple springs from an assortment box and stretched them for more pretrension. Pictures show first version, small improvements in thing files.