Nutcracker
por MakerBot
Ficheiros imprimíveis (23)
-
stlBelt.stl
3.5 Mo · 29 760 descargas
-
stlBootsTop.stl
1.1 Mo · 29 474 descargas
-
stlButtons.stl
1.6 Mo · 29 461 descargas
-
stlBootBand.stl
1.5 Mo · 29 368 descargas
-
stlBootsBottom_30in.stl
6 Mo · 29 509 descargas
-
stlBack_30in.stl
7.2 Mo · 29 494 descargas
-
stlEars.stl
546 Ko · 29 384 descargas
-
stlHatPiece.stl
244 Ko · 29 448 descargas
-
stlHairMustacheEyes.stl
7.9 Mo · 29 505 descargas
-
stlArms.stl
10.9 Mo · 29 333 descargas
-
stlHatParts.stl
3.4 Mo · 29 328 descargas
-
stlGloves.stl
9.9 Mo · 29 319 descargas
-
stlHatStraps.stl
6.8 Mo · 29 340 descargas
-
stlBodyBottom.stl
16.5 Mo · 29 343 descargas
-
stlJaw_30in.stl
4.3 Mo · 29 423 descargas
-
stlShoulderButtons.stl
211 Ko · 29 259 descargas
-
stlBeltBuckle.stl
1.5 Mo · 29 192 descargas
-
stlHead_30in.stl
22.3 Mo · 29 335 descargas
-
stlLegs.stl
10.8 Mo · 29 311 descargas
-
stlIrisAndClips.stl
9 Mo · 29 254 descargas
-
stlShoulderPads.stl
15.4 Mo · 29 212 descargas
-
stlBodyTop.stl
36.7 Mo · 29 433 descargas
-
stlHat.stl
50.1 Mo · 29 678 descargas
Descrição
Its not surprising that the nutcracker is a holiday staple collected by people near and far, young and old. Folklore contends nutcrackers were given to families as gifts to bring them good luck and protect their homes. The MakerBot Nutcracker was designed with the classic in mind but with an updated twist - this one you can make!
This beautifully designed multi-part print is suitable for any of the MakerBot printers. Parts snap-fit together and you can let your imagination run wild with color, but note, this assembly is not recommended for novices.