Non-Split Flap Digital Clock
por shiura
Ficheiros imprimíveis (40)
-
stl1min-adjuster.stl
18 Ko · 697 descargas
-
stl
int-frame2.stl
86 Ko · 671 descargas
-
stl
10min-gear.stl
79 Ko · 669 descargas
-
stl
main-axis.stl
31 Ko · 666 descargas
-
stl
int-gear1-cap.stl
18 Ko · 661 descargas
-
stl
cable-cover.stl
684 o · 662 descargas
-
stl
washer.stl
20 Ko · 663 descargas
-
stl
motor-frame.stl
52 Ko · 663 descargas
-
stl
base-plate.stl
163 Ko · 661 descargas
-
stl
top-cover.stl
209 Ko · 660 descargas
-
stl
10min-adjuster.stl
41 Ko · 666 descargas
-
stl
bottom-cover.stl
82 Ko · 660 descargas
-
stl
int-gear1.stl
126 Ko · 661 descargas
-
stl
int-frame1.stl
148 Ko · 660 descargas
-
stl
hour-adjuster.stl
52 Ko · 661 descargas
-
stl
1min-right.stl
201 Ko · 661 descargas
-
stl
motor-gear.stl
90 Ko · 659 descargas
-
stl
int-gear3.stl
138 Ko · 658 descargas
-
stl
hour-left.stl
220 Ko · 660 descargas
-
stl
int-gear2.stl
117 Ko · 659 descargas
-
stl
10min-rotor.stl
228 Ko · 659 descargas
-
stl
hour-right.stl
343 Ko · 660 descargas
-
stl
left-frame.stl
568 Ko · 658 descargas
-
stl
1min-left.stl
883 Ko · 661 descargas
-
stl
right-frame.stl
562 Ko · 659 descargas
-
stl
1min-flaps.stl
212 Ko · 663 descargas
-
stl
10min-flaps.stl
134 Ko · 665 descargas
-
stl
hour-flaps-1.stl
77 Ko · 663 descargas
-
stl
hour-flaps-2.stl
98 Ko · 660 descargas
-
stl
hour-flaps-3.stl
80 Ko · 660 descargas
-
stl
single-flap-for-test.stl
49 Ko · 670 descargas
-
stl
colon.stl
15 Ko · 662 descargas
-
stl
nano-case-top_fixed.stl
84 Ko · 658 descargas
-
stl
nano-case-bottom_fixed.stl
127 Ko · 658 descargas
-
stl
arduino-case1-button_fixed.stl
32 Ko · 656 descargas
-
stl
RP2040Z-case1.stl
38 Ko · 606 descargas
-
stl
RP2040Z-case2.stl
163 Ko · 606 descargas
-
stl
skeleton-front-frame.stl
4 Ko · 608 descargas
-
stl
skeleton-right-frame.stl
214 Ko · 606 descargas
-
stl
skeleton-left-frame.stl
205 Ko · 607 descargas
Descrição
I developed a new clock mechanism to address the issues present in existing mechanical clocks. Famous split-flap displays exhibit undesirable parting lines in the text, and their display surfaces cannot be tilted as they rely on gravity. Numechron-type clocks feature a relatively small display area compared to the body size, necessitated by the large wheel inside. This "Non-Split Flap Digital Clock" offers numerous advantages, which include:
- The flip rotating mechanism reduces the number of flaps, making it possible to decrease the size of the wheel while ensuring the display area is sufficiently large compared to the body size.
- The display surface is tilted at 15 degrees for better visibility.
- The motor is installed inside the wheel of the tens place for minutes, ensuring there are no protruding parts on either side or the back.
- A one-way hook (ratchet) mechanism enables the automatic alignment of the ones place for minutes. This alignment is performed every minute.
- Time adjustment is made easy by manually rotating the wheels. Both the hour and 10-minute wheels can be rotated in both directions.
- All essential parts can be printed out with relatively small 3D printers (180x180mm). It does not need support structure at all. Filament change during print enables to give multiple colors for flap parts.
Mar 17, 2024 : Optional parts for skeleton version are now available. Two skeleton side frames are modified, and the colored front frame is added. Other parts are identical to the cased version.