Creality K1C Toolbox

por Rothanor

Ficheiros imprimíveis (5)

  • stl

    Bottom_Part.stl

    764 Ko · 2 286 descargas

    Descarregar
  • stl

    Upper_Part.stl

    383 Ko · 1 979 descargas

    Descarregar
  • stl

    Hinge_Pin.stl

    120 Ko · 1 884 descargas

    Descarregar
  • stl

    Retaining_Ring.stl

    85 Ko · 1 847 descargas

    Descarregar
  • step

    K1C_Toolbox.step

    1.1 Mo · 1 077 descargas

    Descarregar

Descrição

This is a fully printable toolbox for some of the standard tools that come with the Creality K1C printer. This was printed in White PLA.

Parts needed:

  • 1 x Upper Part
  • 1 x Bottom Part
  • 2 x Hinge Pin
  • 2 x Retaining Ring

Printer parameters:

  • Layer Height: 0.2mm
  • Infill: 15%
  • Supports: Only for the "Upper Part.stl"
  • Brim: No

After printing, you must remove, on the bottom part, the little diagonal bridges used to sustain the overhang on the lock and the ones used to sustain the holder for the scraper, once it is installed.

Bare in mind that this toolbox may not print 100% for all of you out there. There are comments saying that some of the parts broke, for that reason i've uploaded the .stp file for you to modify it as you wish. I designed this in kinda a rush and you may find the organization a little messy. Sorry :P

Etiquetas

#box #Creality #creality k1c #k1c #tool #Toolbox