SD Storage Locker
por GCV3D
Ficheiros imprimíveis (7)
-
3mfSD_Storage_Locker_Desk_combined_1.3mf
60 Ko · 348 descargas
-
3mfSD_Storage_Locker_Skadis_combined_1.3mf
785 Ko · 213 descargas
-
3mfSD_Storage_Locker_Qube_combined_1.3mf
770 Ko · 215 descargas
-
3mfSD_Storage_Locker_Door_v2.3mf
2.1 Mo · 406 descargas
-
stlSwitch_Cartridge_Storage_Locker_Desk.stl
149 Ko · 151 descargas
-
stlSwitch_Cartridge_Storage_Locker_Qube.stl
2.9 Mo · 139 descargas
-
stl
Switch_Cartridge_Storage_Locker_Skadis.stl
3.3 Mo · 136 descargas
Descrição
Watch a video of the print here!
Keep your SD cards safe and easily accessible with this storage locker. There are three versions:
- QUBE 500 attachable
- Ikea Skadis attachable
- Desktop (no attachment)
1/15/2025 Update: Added versions for holding Switch cartridges.
I printed using PLA on the Prusa i3 MK3 with different colors for the door and body.
Printing & Assembly Tips
The door should be printed first so it can be inserted into the frame! You'll need to pause the print before the door slot is covered (at ~66mm).
I recommend applying organic supports for the QUBE version and grid supports for the Ikea version on build plate only. My slicer also warned me about low bed adhesion when printing the door, but I found that enabling a brim caused some issues with the door moving freely after the print. I removed the brim and just used some glue on the print bed and everything worked great!
Please like it if you do and leave any comments! If you're really feeling generous please consider buying me a coffee so I can keep creating!
Check out my TikTok!
Check out my YouTube!