3D Printed Pendulum Clock
por OldManJohnson
Ficheiros imprimíveis (41)
-
stlGear_Train_Shafts.stl
194 Ko · 4 217 descargas
-
stlAnchor_Esc_and_Spacers.stl
358 Ko · 4 206 descargas
-
stl5.5mm_Gauge_Block.stl
95 Ko · 3 997 descargas
-
stlBearing_Covers_x6.stl
422 Ko · 3 965 descargas
-
stlClock_Face_Mounting_Pins.stl
76 Ko · 4 283 descargas
-
stlClock_Hands.stl
188 Ko · 4 145 descargas
-
stlClock_Mounting_Ring_and_Sleeves.stl
459 Ko · 3 984 descargas
-
stlDoor_Hanger_4mm.stl
27 Ko · 3 938 descargas
-
stlDoor_Hanger_5mm.stl
27 Ko · 3 915 descargas
-
stlFrame_Left_Front.stl
716 Ko · 3 945 descargas
-
stlFrame_Left_Rear.stl
520 Ko · 3 942 descargas
-
stlFrame_Mid_Front.stl
604 Ko · 3 922 descargas
-
stlFrame_Mid_Rear.stl
345 Ko · 4 059 descargas
-
stlFrame_Right_Front.stl
514 Ko · 3 939 descargas
-
stlFrame_Right_Rear.stl
306 Ko · 3 938 descargas
-
stlFrame_Standoff_x6.stl
28.9 Mo · 3 988 descargas
-
stlPendulum_Bob_Body_and_Cover.stl
1.2 Mo · 3 931 descargas
-
stlPendulum_Connectors_x5.stl
10 Ko · 3 926 descargas
-
stlPendulum_Head.stl
104 Ko · 3 929 descargas
-
stlPendulum_Inserts_x6.stl
479 Ko · 3 913 descargas
-
stlPendulum_Shaft_Extension.stl
3 Ko · 3 916 descargas
-
stlPendulum_Yoke_and_Hanger.stl
196 Ko · 3 960 descargas
-
stlWeight_Drum_Ratchet.stl
274 Ko · 4 023 descargas
-
stlWeight_Drum_Top_and_Bottom.stl
340 Ko · 4 012 descargas
-
stlPendulum_Bob_Adjuster_and_Nut.stl
9.2 Mo · 3 979 descargas
-
stlWeight_Body_Extension.stl
1.9 Mo · 4 084 descargas
-
stlWeight_Drum_Top_Cover_and_Spacers.stl
6 Mo · 3 986 descargas
-
stlWeight_Screw_Bottom_x3.stl
2.8 Mo · 3 987 descargas
-
stlWeight_Screw_Top_x2.stl
1.9 Mo · 4 016 descargas
-
stlWeight_Body.stl
2 Mo · 3 881 descargas
-
stlClock_Face_with_Numerals.stl
2.1 Mo · 4 099 descargas
-
stlPendulum_Sections_x5.stl
17 Ko · 4 079 descargas
-
stlGear_3.stl
5.5 Mo · 329 descargas
-
stlGear_4.stl
5.9 Mo · 325 descargas
-
stlGear_5.stl
498 Ko · 318 descargas
-
stlGear_7-Pinion_7-Hub_and_Spacer.stl
9.7 Mo · 326 descargas
-
stlPinion_3_and_Spacers.stl
562 Ko · 329 descargas
-
stlPinion_4_and_Spacers.stl
492 Ko · 324 descargas
-
stlGear_2-Pinion_2_and_Spacers.stl
4 Mo · 333 descargas
-
stlGear_6-Pinion_6_and_Shaft.stl
8.8 Mo · 340 descargas
-
stlTiming_Gear-Pinion_1_and_Spacers.stl
6.7 Mo · 366 descargas
Descrição
I do enjoy making 3D models that actually DO something instead of just looking nice. A weight operated pendulum clock is certainly one of my favorites. This model, one of my newer designs, not only DOES something (it keeps time) but also looks good.
Most of the clock is 3D printed, but a few items still need to be purchased (I've not been able to print screws, bearings, nylon cord, or lead shot). Links to examples of each are included in the (very detailed) assembly instructions (PDF document).
The clock is 346mm (14in) wide and 1.3m (50in) tall (with the weights and pendulum) and has a run time between windings of about 36 hours.
All the parts were printed in PLA.
The maximum bed size needed is 188mm x 180mm.
UPDATE 01/10/26: The tooth counts for gears and pinions 6 and 7 were reversed in the text file 'Gear Train Timings.txt', The error has been fixed in the new file. This has no effect on the model.
UPDATE and CORRECTION 01/11/26: The model for the clock face (Clock_Face.STL) did not include the raised numerals that allow for two color printing. A new update model (Clock_Face_with_Numerals.STL) has been added and the assembly instructions updated.
UPDATE and CORRECTION 01/13/26: The models in the file Pendulum_Sections_x5.STL have been fixed so that the Pendulum Connectors will fit either end of the sections (one end of the pendulum section models in the previous upload was not the correct size).
UPDATE 02/23/26: Added a zip file ('Parts Modified for 624 Bearing.zip') containing parts that have been modified to use 624 bearings (4mm ID, 13mm OD, 5mm thick) instead of the 686 bearings. Note that none of these replacement parts have been tested. Use of these modified parts in place of the corresponding original parts is purely optional.