LED Flashlight

por herisuprapto

Ficheiros imprimíveis (5)

  • stl

    LED_flashlight_-_bottom.STL

    31 Ko · 511 descargas

    Descarregar
  • stl

    LED_flashlight_-_top.STL

    122 Ko · 526 descargas

    Descarregar
  • stl

    LED_flashlight_-_components_holder.STL

    16 Ko · 509 descargas

    Descarregar
  • stl

    LED_flahlight_-_button_cover.STL

    10 Ko · 506 descargas

    Descarregar
  • stl

    LED_flahlight_-_o_ring.STL

    28 Ko · 510 descargas

    Descarregar

Descrição

This flashlight I have been using about 3 months ago, I was quite happy with the result although a little difficult to install components. The idea comes from here: http://www.instructables.com/id/LED-Torch-2, there are some components that I replace it with what I have.

Electronic components that I use is:

  1. 8 mm straw hat LED
  2. 6.8Ohm Resistor 5%
  3. Diode IN 4007
  4. Push Button Switch(http://www.ebay.com/itm/10x-Red-Push-Button-Switch-6-Pins-Latching-DPDT-Tact-Tactile-Self-locking-DPDT-/380810457498)
    5.DC power jack (http://www.p-wholesale.com/upimg/5/121a2/dc-power-jack-570.jpg)
  5. Battery 4V 1200mA
  6. 3mm allen socket bolt with 10mm long, 2 pieces.
  7. 3mm hex screw nut, 2 pieces.

I also attach a new diagram, this flashlight can light up more than 8 hours. Charging the battery using an adapter 5V 1A for 1.5 hours.

Etiquetas

#flashlight #LED #lightitup #Rechargeable