hand cuffs
par caj
Fichiers imprimables (9)
-
stlremixed_key.stl
18 Ko · 7 725 téléchargements
-
stlremixed_b1_top_main_body.stl
282 Ko · 7 666 téléchargements
-
stlremixed_b2_rotation_latch.stl
407 Ko · 7 647 téléchargements
-
stlchain_3_pieces.stl
508 Ko · 7 576 téléchargements
-
stlremixed_a1_main_body.stl
1.2 Mo · 7 698 téléchargements
-
stlremix_a3.stl
34 Ko · 7 625 téléchargements
-
stllarger_nut_set_2_.stl
2 Mo · 7 542 téléchargements
-
stlremixed_ratchet_gear.stl
118 Ko · 7 550 téléchargements
-
stlchain_w_lock_set.stl
311 Ko · 7 498 téléchargements
Description
just did a remix of the chain w ring to glue on to lock the chain together this is either a good or bad upgrade i will let you decide i am leaving both chains uploaded so you can chose
just remixed the ratchet gear apparently every body who has download this owns a reaming tool because nobody has said any thing about it
just added larger better fitting locking nuts to put the locking nuts on use your thumb and press them on while turning more pressing than turning sorry if you broke posts don't feel bad i have printed 20 of these things trying to get every thing right
took a while but have finally fixed these cuffs this is a complete remake of the best handcuffs so far on this sight the problems with the original was many it was really flimsy and easy to break by just pulling a little in any directions would break the inner mechanisms and the key has ben revamped as well as quite a few other items these handcuffs are now super duper police trooper strong i have pulled as hard as i can and can not break them your perp will not be getting out of these cuffs also combined parts files for less files and easier printing one other note you should print these with pla i have strengthened things to print good in abs but the posts where you put the nuts on are still easy to break with abs pla is much stronger than abs and not as brittle