Trailer Plug Cover

par davec1225

Fichiers imprimables (4)

  • stl

    Cover_without_Bracket.stl

    9.5 Mo · 2 359 téléchargements

    Télécharger
  • stl

    Cover_with_Bracket.stl

    13.6 Mo · 2 580 téléchargements

    Télécharger
  • stl

    Cover_Plug_Half.stl

    11 Mo · 2 312 téléchargements

    Télécharger
  • stl

    Cover_Clamp_Half.stl

    2.6 Mo · 2 280 téléchargements

    Télécharger

Description

Split in two parts for people with smaller printers.

Also See 4 Pin version http://www.thingiverse.com/thing:2010808

Since I only use my trailer during the warm months, I wanted to have the plug covered to keep dirt, rain, snow and bugs out of it.

So I made this cover that fits snuggly over the plug.
I made it with and without a clamp that allows me to clamp it to the jack.

Please note, if you decide to use this. You need to keep the closed end up. Otherwise it will likely collect water and hold it next to the plug. Which would make matters worse.

You’ll also need:

2 ¼” x1” bolts
2 ¼” 20 nuts (I used Nylon lock nuts)
2 1/4 “ washers (optional)

Tags

#cover #hitch #plug #trailers