Hypercube Evolution 2020
par martind_n
Fichiers imprimables (45)
-
stlMKS_Sbase_1.3_Mount_v3.stl
59 Ko · 27 644 téléchargements
-
stlZ_Rail_Bracket_Top_Right_8mm.stl
128 Ko · 28 240 téléchargements
-
stlZ_Rail_Bracket_Bottom_Left_8mm.stl
86 Ko · 28 205 téléchargements
-
stlZ_Rail_Bracket_Bottom_Right_8mm.stl
85 Ko · 28 224 téléchargements
-
stlZ_Rail_Bracket_Top_Left_8mm.stl
127 Ko · 28 153 téléchargements
-
stlZ_Motor_Mount.stl
81 Ko · 28 331 téléchargements
-
stlZ_Linear_Rail_Holder_Bottom_Right.stl
87 Ko · 28 260 téléchargements
-
stlZ_Linear_Rail_Holder_Top_Right.stl
129 Ko · 28 204 téléchargements
-
stlXY_Idler_Left.stl
150 Ko · 28 283 téléchargements
-
stlXY_Motor_Right.stl
233 Ko · 28 321 téléchargements
-
stlZ_Linear_Rail_Holder_Bottom_Left.stl
88 Ko · 28 163 téléchargements
-
stlZ_Linear_Rail_Holder_Top_Left.stl
129 Ko · 28 126 téléchargements
-
stlXY_Idler_Right_v7.stl
150 Ko · 28 189 téléchargements
-
stlXY_Motor_Left.stl
229 Ko · 28 199 téléchargements
-
stlXY_Idler_Right_LM10.stl
145 Ko · 28 004 téléchargements
-
stlY_EndStop_Bracket.stl
73 Ko · 28 021 téléchargements
-
stlXY_Idler_Left_LM10.stl
144 Ko · 27 954 téléchargements
-
stlExtruder_Mount_2_Opt.stl
195 Ko · 28 030 téléchargements
-
stlXY_Motor_Left_10mm.stl
233 Ko · 27 926 téléchargements
-
stlXY_Motor_Right_10mm.stl
237 Ko · 27 881 téléchargements
-
stlZ_Axis_Bearing_Holder_LM8uu.stl
139 Ko · 27 884 téléchargements
-
stlPS_Mount_Inner_Right_v3.stl
40 Ko · 27 739 téléchargements
-
stl24v_PS_Upper_Bracket_v2.stl
33 Ko · 27 725 téléchargements
-
stl5V_Buck_Mount_v1.stl
275 Ko · 27 742 téléchargements
-
stlBed_Relay_Bracket_v5.stl
874 Ko · 27 684 téléchargements
-
stlBuck_Bracket_v4.stl
871 Ko · 27 676 téléchargements
-
stlExtruder_Motor_Mount_v2.stl
64 Ko · 27 689 téléchargements
-
stlFilament_Sensor_v8.stl
95 Ko · 27 709 téléchargements
-
stlFilament_Sensor_Cap_v2.stl
39 Ko · 27 705 téléchargements
-
stlFront_MKS_TFT32_v7.stl
460 Ko · 27 653 téléchargements
-
stlBack_MKS_TFT32_v10.stl
294 Ko · 27 639 téléchargements
-
stlTFT_Bracket_Right_v5.stl
48 Ko · 27 622 téléchargements
-
stlTFT_Bracket_Left_v5.stl
49 Ko · 27 636 téléchargements
-
stlRAMPS_Bracket_v5.stl
70 Ko · 27 603 téléchargements
-
stlCilinder.stl
119 Ko · 27 573 téléchargements
-
stlM8_Nut_Handle.stl
62 Ko · 27 594 téléchargements
-
stlSpool_Holder.stl
384 Ko · 27 554 téléchargements
-
stlPTFE_Clamp_2020_Lat_v1.stl
38 Ko · 27 568 téléchargements
-
stlPTFE_Clamp_2020_2.stl
68 Ko · 27 535 téléchargements
-
stlExtruder_Mount_2.0_v2.stl
197 Ko · 27 528 téléchargements
-
stlBLTouch_Mount_v4.stl
148 Ko · 26 977 téléchargements
-
stlLeft_Motor_2020_10mm_v1_v1.stl
233 Ko · 19 979 téléchargements
-
stlRight_Motor_2020_10mm_v1_v1.stl
237 Ko · 19 961 téléchargements
-
stlXY_Idler_Mount_Right_2020_10mm_v1_v1.stl
145 Ko · 19 956 téléchargements
-
stlXY_Idler_Mount_Left_2020_10mm_v1_v1.stl
144 Ko · 19 936 téléchargements
Description
Here where I live is almost impossible to get 3030 extrusion, so I come up with this remix in order to build HyperCube Evolution on 2020 extrusion.
The missing parts shall remain the same as the ones posted by Scott.
Design is for 8mm linear rail on both X and Y.
I didn't print it yet since I'm still waiting my extrusions to arrive, so if you find any error, please let me know.
UPDATES
05-Sep: Finally all the parts have been printed and fits smoothly on 2020 profile. Original desing by Scott for Z nut holder fits fine also.
18-Sep: Idlers for 10mm rod. Modified Y endstop bracket to fit better with endstop flag. New Extruder mount to fit both min and max opto endstop. Files for 8mm Z rods.
13-Dec: Well, after a long time I finished the printer a coule of weeks ago. New pictures are available in order to check the whole remix from the original HEVO.
I added a TFT32 controller + MKS WiFi module. Also, in the same enclosure I added a couple o LED to indicate when either E0 or the Heatedbed are working. All the desings for the parts I'm using are available for download.
Also I attached two led stripes that can be turned on from MKSTFT32 and a runout filament sensor to help avoiding run out of filament during long printings.
It's fair to mention I remixed the spool holder from @bliatun (https://www.thingiverse.com/thing:2084843) and @rowokii (https://www.thingiverse.com/thing:767317).
19-Jan: Redesigned Extruder Mount. The problem I found with the original version is that the brass knurled inserts are not attached strongly enough to the plastic, so once you start tigthening the bolts, the inserts start poping out. In this new design, the inserts were placed at the back of the piece, so you can tight the screws as much as you want with out any issue.
3-May: The mods continue... Added new electronics, MKS Sbase 1.3 with its mount bracket (available for downloading). My Hevo2020 has a new Drakon Extruder by @AxMod3DPrint (https://www.thingiverse.com/thing:2172854) this was needed to get a smoother flow on the filament, without it, the extruder motor was skipping some steps, so I decided to add a geared extruder to avoid so... Also added cable chain for X and Y axles (still pending in Z). Cable chain desing by @lamturbo (https://www.thingiverse.com/thing:2823973). Also the mods for dual extrusion have began, keep you posted!
31-May: Dual extrusion! After a lot of tweaking (fighting) against SW and HW, I could finally get my HEVO 2020 Multimaterial. I added a TL-Feeder and after a lot of testing and filament wasting it now works like a charm. Also, I also added a new filament sensor that fits Drakon Extruders.
26-Jun: Tired of fighting with capacitive sensor for Z-Probe, decided to change it for mostly flawless TLTouch (BLTouch clone). Mount for this piece just fits the place for inductive sensor without needing to change any part already printed.
That's all folks...(?)