Twisted Tower
par kijai
Fichiers imprimables (3)
-
stltwisted_tower_base_02.stl
18.3 Mo · 8 012 téléchargements
-
stltwisted_tower_merged_02.stl
29.6 Mo · 8 258 téléchargements
-
stltwisted_tower_02.stl
17.1 Mo · 8 137 téléchargements
Description
A twisting tower standing on a very unnatural hill.
You can print the tower and the base separately, or whole thing at once. Either way no supports are necessary. I would recommend printing the tower slower and with lower layer height. Also for the stairs it's recommended to use higher infill to support the steps, and/or many top layers. My print with 15% infill and 4 top layers had some small gaps.