EEZYbotArm MK3
par daGHIZmo
Fichiers imprimables (19)
-
stlEBA3_015.STL
42 Ko · 65 010 téléchargements
-
stlEBA3_018.STL
14 Ko · 64 817 téléchargements
-
stlEBA3_010.STL
714 Ko · 64 807 téléchargements
-
stlEBA3_006.STL
994 Ko · 64 709 téléchargements
-
stlEBA3_008.STL
954 Ko · 64 597 téléchargements
-
stlEBA3_012.STL
1.2 Mo · 64 687 téléchargements
-
stlEBA3_014.STL
384 Ko · 64 685 téléchargements
-
stlEBA3_017.STL
1017 Ko · 64 600 téléchargements
-
stlEBA3_009.STL
540 Ko · 64 660 téléchargements
-
stlEBA3_005.STL
647 Ko · 64 575 téléchargements
-
stlEBA3_016.STL
648 Ko · 64 536 téléchargements
-
stlEBA3_007.STL
561 Ko · 64 526 téléchargements
-
stlEBA3_011.STL
218 Ko · 64 667 téléchargements
-
stlEBA3_010_B.STL
700 Ko · 64 435 téléchargements
-
stlEBA3_001.STL
4.1 Mo · 64 487 téléchargements
-
stlEBA3_002.STL
5.7 Mo · 64 468 téléchargements
-
stlEBA3_003.STL
6.5 Mo · 64 817 téléchargements
-
stlEBA3_004.STL
5.4 Mo · 64 657 téléchargements
-
stlEBA3_013.STL
1.2 Mo · 64 374 téléchargements
Description
This is a 3D printed robotic Arm.
It follows the success of my previous two designs: EEZYbotARM and EEZYbotARM Mk2
It has the same dimensions of the first one, so it is extremely cheap and fast to print only the main base requires a little bit more time to be printed.
This version was created with the willingness to replace the servo with economic stepper motors, and this is the result.
During development I found the stepper a little weak for the purpose, so I redesigned the transmissions on vertical arms, and apply a modification on stepper from unipolar to bipolar.
As the previous two arms it has been designed without a definite purpose, the aim is educational, providing a suitable hardware that allow to concentrate on exploring all its potential applications.
The making video: EEZYbotARM mk3 - The making
The preliminar tests video: EEZYbotARM MK3 tests