Dremel deburring adapter
par CrackBaron
Fichiers imprimables (5)
-
stlmain.stl
143 Ko · 2 377 téléchargements
-
stlmain_part2.stl
30 Ko · 2 370 téléchargements
-
stlTop_V1.stl
56 Ko · 2 379 téléchargements
-
stlTop_V2.stl
29 Ko · 2 369 téléchargements
-
stlTop_V3.stl
29 Ko · 2 375 téléchargements
Description
This is a simple attachment to the Dremel 3000 and 4000.
With this thing you can simply deburring parts.
Simply slide the edge you want to deburring through the top part and this will remove any sharp edge from this side.
You can adjust the size of the bevel with four screws under the top part.
I used mine to deburring cnc-milled parts made from stainless steel.
Mine were fixed to a wooden board, to make it more durable.
Note: You will need some screws (2x M3x10 mm, 4x set screw M3x8, 4 wood screws (if you want it to fix on a wooden board)
As tool in the Dremel I used a 3 mm hard metal milling cuter for metal.
The Dremel Attachment by "Karlosek" inspired me to make this thing.