Micro Air Engine
par Thingynze
Fichiers imprimables (6)
-
stlcilinder.stl
74 Ko · 7 131 téléchargements
-
stlconnecting_rod.stl
38 Ko · 7 003 téléchargements
-
stlcrankshaft.stl
49 Ko · 6 979 téléchargements
-
stlpiston.stl
70 Ko · 7 012 téléchargements
-
stlflywheel.stl
49 Ko · 6 975 téléchargements
-
stltimingvalve.stl
76 Ko · 7 022 téléchargements
Description
This is a very small air powered engine. It works with a very simple rotating valve mechanism but is not efficient because the seals are not very good. It does however work pretty well.
If you have any questions or suggestions feel free to leave a comment.
https://m.youtube.com/watch?v=1TcHk7wkcCI
You need this hardware:
2x 7mm 2m screws with 3.5x1 mm heads
2x 4mm 2m screws
a small tube with an OD of 4mm