Fallout Combat Armor
par MrNebby22
Fichiers imprimables (50)
-
stlBicep_Middle.stl
711 Ko · 12 857 téléchargements
-
stlBicep_Bottom.stl
1.3 Mo · 12 785 téléchargements
-
stlBicep_Top.stl
3.2 Mo · 12 807 téléchargements
-
stlChest_Back_Left_Top.stl
375 Ko · 12 805 téléchargements
-
stlChest_Back_Left_Middle.stl
315 Ko · 12 815 téléchargements
-
stlChest_Back_Left_Bottom.stl
449 Ko · 12 797 téléchargements
-
stlChest_Back_Right_Bottom.stl
449 Ko · 12 791 téléchargements
-
stlChest_Back_Right_Top.stl
375 Ko · 12 786 téléchargements
-
stlChest_Back_Right_Middle.stl
315 Ko · 12 762 téléchargements
-
stlChest_Front_Left_Upper_Mid.stl
224 Ko · 12 800 téléchargements
-
stlChest_Front_Right_Top.stl
517 Ko · 12 798 téléchargements
-
stlChest_Front_Right_Bottom.stl
759 Ko · 12 766 téléchargements
-
stlChest_Front_Left_Bottom.stl
759 Ko · 12 778 téléchargements
-
stlChest_Front_Left_Lower_Mid.stl
917 Ko · 12 759 téléchargements
-
stlChest_Front_Left_Top.stl
517 Ko · 12 741 téléchargements
-
stlChest_Front_Right_Upper_Mid.stl
224 Ko · 12 761 téléchargements
-
stlChest_Front_Right_Lower_Mid.stl
918 Ko · 12 736 téléchargements
-
stlElbow_Top.stl
280 Ko · 12 676 téléchargements
-
stlElbow_Bottom.stl
708 Ko · 12 664 téléchargements
-
stlForearm_Bottom.stl
360 Ko · 12 675 téléchargements
-
stlForearm_Top.stl
329 Ko · 12 670 téléchargements
-
stlJock_Bottom.stl
832 Ko · 12 651 téléchargements
-
stlJock_Top.stl
1 Mo · 12 646 téléchargements
-
stlKnee_Bottom.stl
863 Ko · 12 656 téléchargements
-
stlKnee_Top.stl
1.3 Mo · 12 646 téléchargements
-
stlShin_Bottom.stl
953 Ko · 12 645 téléchargements
-
stlShin_Top.stl
1.2 Mo · 12 641 téléchargements
-
stlThigh_Left_Middle.stl
679 Ko · 12 613 téléchargements
-
stlThigh_Right_Bottom.stl
1.5 Mo · 12 621 téléchargements
-
stlThigh_Left_Top.stl
1.5 Mo · 12 621 téléchargements
-
stlThigh_Right_Middle.stl
679 Ko · 12 610 téléchargements
-
stlThigh_Right_Top.stl
1.6 Mo · 12 608 téléchargements
-
stlThigh_Left_Bottom.stl
1.5 Mo · 12 588 téléchargements
-
stlElbow.stl
911 Ko · 12 597 téléchargements
-
stlKnee.stl
1.7 Mo · 12 590 téléchargements
-
stlShin.stl
1.4 Mo · 12 603 téléchargements
-
stlChest_Back.stl
1.4 Mo · 12 739 téléchargements
-
stlForarm.stl
458 Ko · 12 602 téléchargements
-
stlJock.stl
1.5 Mo · 12 547 téléchargements
-
stlChest_Front.stl
3.3 Mo · 12 825 téléchargements
-
stlThigh_Right.stl
3.2 Mo · 12 587 téléchargements
-
stlThigh_Left.stl
3.2 Mo · 12 561 téléchargements
-
stlBicep.stl
4.2 Mo · 12 639 téléchargements
-
stlChest_Front_Blank.stl
3.3 Mo · 9 950 téléchargements
-
stlChest_Front_Blank_Middle_Right.stl
569 Ko · 7 322 téléchargements
-
stlChest_Front_Blank_Bottom_Left.stl
694 Ko · 7 305 téléchargements
-
stlChest_Front_Blank_Top_Left.stl
521 Ko · 7 285 téléchargements
-
stlChest_Front_Blank_Middle_Left.stl
568 Ko · 7 281 téléchargements
-
stlChest_Front_Blank_Bottom_Right.stl
695 Ko · 7 280 téléchargements
-
stlChest_Front_Blank_Top_Right.stl
521 Ko · 7 282 téléchargements
Description
This is a replica of the Sturdy Combat Armor from fallout 4 and fallout 76. Pip-boy not included.
I did leave out the leather stuff under the chest pieces and on some of the other pieces as i could not print thing and i had no access to them along with the pouches that go along the waist as again they were not printable and i had no access to bought ones
These models were drawn using reference images to get the most accurate and highest details.
I have the models cut into chunks so it can fit on smaller printers and so if a print fails it's not as bad.
It it sized to fit a 180lbs 6 foot male so if you are bigger or smaller you may need to resize some parts (i sized it based on the inner of each part). If you are female then im not sure if these models will work, you may need to edit some of them, or just go for it and print them, idk.
Most parts are a little small for my liking, but could easily be resized to fit exactly like ingame.
Note: all parts but the forearm, chest, back, jock, and left and right thighs need to be printed twice, the parts that are to be printed twice are the same for the left and right so i only have one set of models (print 2 forearms if you do not have a pip-boy, if you have a pip-boy the only print one as your pip-boy takes up that space).