Triangular Bladeless Fan
par DanielMitchell
Fichiers imprimables (1)
-
stlTRIANGLE_DUCT_120mm__92mm.STL
245 Ko · 21 782 téléchargements
Description
A unique triangular design of the popular bladeless fan. The "bladeless" design uses an airfoil shape to suck and capture additional air, thus increasing overall air-flow and cooling.
Triangle 120mm.STL and STAND 120mm.STL have been updated to provide better airflow.
I am currently working on a hairdryer fan compatible version.
(See provided pictures for detailed component and design views)
The project requires a couple of other components:
- 92mm or 120mm computer fan (120mm recommended as the smaller fan does not provide enough airflow), A high end fan is also better as they provide more airflow, less blow-back and quieter operation.
- Power Supply (12V DC dependent on fan)
- On/Off switch (optional)
- Double sided tape,Cable ties or 4 x M4 nuts & bolts (To mount the fan onto the stands inner supports)
- Glue gun (Make sure to seal holes and connections to prevent air from escaping)
The following print settings are recommended:
TRIANGLE 120mm.STL
Layer Height: 0.2
Infill: 30% (Grid)
Supports: Yes (everywhere)
Bed Adhesion: NoTRIANGLE DUCT 120mm & 92mm.STL
Layer Height: 0.2
Infill: 30% (Grid)
Supports: Yes (everywhere)
Bed Adhesion: Brim- STAND 120mm.STL
Layer Height: 0.2 - 0.28
Infill: 45% (Grid)
Supports: Yes (touching building plate)
Bed Adhesion: Brim
(The total print time is around 40 hours)
Please leave a like or comment ( :