Tool Holder
par LethalTeaspoon
Fichiers imprimables (6)
-
stlTool_Holder.stl
8.1 Mo · 1 913 téléchargements
-
stlDrawer_v2.stl
2.5 Mo · 1 882 téléchargements
-
stlDrawer_Knob.stl
2.2 Mo · 1 880 téléchargements
-
stlRound_Pot_Insert_Large.stl
478 Ko · 1 879 téléchargements
-
stlRectangle_Pot_Insert.stl
843 Ko · 1 869 téléchargements
-
stlRound_Pot_Insert_Small.stl
344 Ko · 1 873 téléchargements
Description
I wanted a tool holder to fit all my 3d printing bits and pieces,so I designed the Cool Tool Holder, it holds all my 3D printing tools with room to spare, and with the inserts, it is very adaptable.
Made so a normal glue stick will fit in any of the 3 round rear pots, with the rear rectangular pot large enough to hold my digital callipers, scraper, pliers, scribe and room to spare, with the 14 smaller pots, ( two rows of 7 ) these will hold all my screwdrivers of various sizes, the next two rectangular pots hold my flush cutters and Leatherman tool. The drawer is deep enough to hold a Stanley blade pack.
I printed the main Tool Holder on its back and used support for the tool wells, Leaving the internal drawer holder space support free, This worked well for me. The drawer I printed bottom down and used support for the draw runner recesses. The drawer knob was printed 4mm thread up with no support, and all pots bottom down with no supports.
Its not a quick print, but looks good and keeps everything in one place.
Printed with Sunlu PLA Plus.
Enjoy.