Jet Engine 60% Scale
par calebfwood
Fichiers imprimables (17)
-
stlCombustion_and_HPT_Casing.stl
2.3 Mo · 14 889 téléchargements
-
stlCowling_Pin.stl
83 Ko · 14 750 téléchargements
-
stlFan_Casing.stl
2.4 Mo · 14 780 téléchargements
-
stlLPT_Spool.stl
1.2 Mo · 14 727 téléchargements
-
stlHPC_Spool.stl
2.2 Mo · 14 736 téléchargements
-
stlLow_Pressure_Shaft_Aft_Rev_A.stl
797 Ko · 14 731 téléchargements
-
stlCowling_Front.stl
223 Ko · 14 738 téléchargements
-
stlCowling_Rear.stl
1.2 Mo · 14 840 téléchargements
-
stlLPT_Casing.stl
2.3 Mo · 14 708 téléchargements
-
stlHP_Core_Casing.stl
1.9 Mo · 14 691 téléchargements
-
stlLow_Pressure_Shaft_Front_Rev_A.stl
498 Ko · 14 694 téléchargements
-
stlHPT_No_Supports.stl
3.8 Mo · 14 720 téléchargements
-
stlFan_Stator_Casing_and_Support_No_Supports.stl
12.3 Mo · 14 742 téléchargements
-
stlNozzle_No_Supports.stl
8.3 Mo · 14 707 téléchargements
-
stlMixer.stl
14.5 Mo · 14 733 téléchargements
-
stlFan_No_Supports.stl
19.6 Mo · 15 015 téléchargements
-
stlStand_Ellipses.stl
4.7 Mo · 13 626 téléchargements
Description
A 60% scale version of the 3D Printable Jet Engine by CATIAV5FTW. I printed the full size version first, but it is so large, I wanted a smaller version to give to a friend as a gift. I resized the pieces and adjusted them to use the same hardware screws as the original model, but smaller bearings. Only the modified files are included, the rest can be downloaded from the original post.
The bearings are 10x22x6mm and 12x28x8mm (6001) that were purchased off of ebay.