Temp and Stringing Test

par arleyj

Fichiers imprimables (3)

  • stl

    Temp_and_Stringing_Test.STL

    695 Ko · 32 633 téléchargements

    Télécharger
  • 3mf

    Temp_and_Stringing_Test.3mf

    297 Ko · 30 625 téléchargements

    Télécharger
  • step

    Temp_and_Stringing_Test.STEP

    3.3 Mo · 30 236 téléchargements

    Télécharger

Description

I use this small combination temp and stringing test to determine the best settings for each roll of PLA that I use. The temperature range used is 180 to 225 degrees C. After printing you are able to determine what the best temperature setting is for stringing, bridging, fine detail and layer adhesion. This test print is based on using a .4 nozzle, and when printing, don't forget to set your flow rate. A Cura 3.6 profile is included, as well as the gcode, step and stl files.