Power Strip Bracket Angled

( I have another version of this model here on thingiverse ,that
mounts under the table ,get it here :
https://www.thingiverse.com/thing:3327440 )

If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please
consider using this link :

This is a set of angled brackets to mount/hold your power-strip
54mm x 38.5mm (EU model) at the edge off your workbench ,
table or where ever you need a power-strip to be placed for easy access .
They fit perfectly the power-strips i have ,but i can't guarantee that it will fit
yours ,place be aware of the size of 54mm x 38.5mm .
There is a bracket-set to both the right and left side ,as to how one wants
the cord to be placed.

They are designed pretty strong ,because i do very often have to change
power plugs since the power-strip sits on my workbench .

To assure proper stability it is very important that you use all
screw holes ,and i have put some double sided sticking tape between
the table and the underside of the brackets ,just to be sure
that the brackets stay in place when pulling the power plugs out .