Net tying Kit
par MBRandR
Fichiers imprimables (7)
-
stlnet_tying_holder.stl
1.1 Mo · 1 496 téléchargements
-
stlnet_tying_bench_holder.stl
324 Ko · 1 485 téléchargements
-
stlnetting_needle_8mm_x_120mm.stl
56 Ko · 1 531 téléchargements
-
stlnetting_needle_15mm_x_180mm.stl
330 Ko · 1 593 téléchargements
-
stlnetting_needle_20mm_x_220mm.stl
340 Ko · 1 583 téléchargements
-
stlnet_tying_mesh_guages_10mm_-_35mm.stl
626 Ko · 1 558 téléchargements
-
stlnet_tying_mesh_guages_40mm_-_50mm.stl
271 Ko · 1 515 téléchargements
Description
Heres a little kit for use when making nets for fishing , crafts , survival and many other uses for nets lol
The metal rod is held in place with the little flat that bolts to side ( this is a just a blank hole so will need threading with a M3 tap )
The holder can be flipped over to hold net the right way for adding new rows
requires
M6 x 25 Hex head bolt
M6 nut
M3 x 8-10 bolt ( use a cap or button head )
2mm steel rod ( 82mm long )
2 or 4 countersink screw/bolts to hold down which bracket you use :)
The M6 bolt head and nuts may be a tight fit depending on printer settings , but warming them up should make them install easier and give tight fit
kit also has 3 sizes of needles and a selection of different mesh gauges for making different size nets
If you want any other needles or gauges please let me know and ill add them to the thing :)
Look forward to seeing the nets you make with this kit :)
Follow me on Facebook and Instagram to see the things i make with them :)
https://www.facebook.com/MBRCreationStation
https://www.instagram.com/mbr_creation_station
Use supports for the " net tying holder" as the end of the arms are tapered so dont sit flat on bed , the supports are very minimal
The smallest needle does have a slot in the tip , tho it may join when printed but just snip through the join with a knife or side cutters to free it up and keep the gap tight so your thread doesnt come off the needle :)